B&B Electronics RS-422 manual Install the Card

Install the Card

1.Shut down your computer.

2.Unplug the power cord to remove power to prevent accidentally turning on the computer during installation.

3.Remove the cover of the computer.

4.Locate an empty PCI expansion slot.

5.Remove the expansion slot cover. Save the retaining screw.

6.Ground yourself to the computer chassis before and while inserting the card.

7.Install the card into the unused slot. Be certain that the card is inserted completely (fully seated) in the slot.

8.Secure the card with the mounting screw from step 5.

9.Replace the cover, plug in the power cord.

10.Connect your cables.

11.Power up the system.

12.Install the drivers as indicated in chapter 3. (Next page)

B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445