![](/images/new-backgrounds/1263229/263229105x1.webp)
Chapter 7: Troubleshooting
If you have any trouble starting your system after installing the card, the card may not be properly seated in the slot. Remove and re- insert it or try a different slot. Check BIOS is set for PnP OS.
If you are unable to communicate with the card using your software and hardware devices:
1.Check your pinouts. In
2.Use the ComTest program provided on the Disc with a loopback to check the card.
3.Run Setup.exe to install COMTest on your program menu under B&B Electronics.
48 | Chapter 7 | Documentation Number |
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph