B&B Electronics 2010 manual General Information, Features, Description

Page 4

2.0 GENERAL INFORMATION

Thank you for your purchase of this B&B Electronics product. This

product has been thoroughly inspected and tested and is warranted for one year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to contact B&B Electronics Technical Support at (815) 433-5100.

2.1 FEATURES

Conforms to CCITT V.14 and V.22 standards

Adapts asynchronous terminals to synchronous modems and multiplexers

Allows character lengths from 8 - 11 bits

Requires no AC power or batteries

Data rates to 19.2 Kbps

Automatically adjusts synchronous data rates

Miniature size

Accepts external clocking

Made in the USA

2.2 DESCRIPTION

The Model 2010 converter gives asynchronous hardware access to the high speed capabilities of synchronous modems or multiplexers. The Model 2010 plugs directly into the asynchronous RS-232 DTE port and connects via RS-232 cable to the synchronous DCE device.

Drawing power from the RS-232 interface, the Model 2010 needs no AC power or batteries to operate and supports data rates to 19.2 Kbps. Because the Model 2010 automatically adjusts the synchronous data rate to match the asynchronous DTE's output rate, no data rate strapping is necessary. The Model 2010 derives clocking externally from the clock of the synchronous DCE, and imposes no limit on data block size. Characters may be up to 11 bits long.

Measuring only 3.2" x 2.0" x .75", the Model 2010 is housed in a sturdy ABS plastic case. It comes fully equipped with a DB-25 male connector and a DB-25 female connector.

2

2010AS3297 Manual

B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 434-7094

Image 4
Contents Asynchronous to Synchronous Converter Table of Contents Service Warranty InformationRadio and TV Interference General Information FeaturesDescription Configuration Setting Internal SwitchesSwitch Settings Switches SW1-1 and SW1-2 Character LengthSwitch SW1-4 Not Used Connecting the Asynchronous Port InstallationConnecting the Synchronous Port Appendix a Specifications Data Transmission Full or half duplex ConnectorsAppendix B Asynchronous Port Connections Configured AS DCE Appendix C Synchronous Port Connections Configured AS DTE Appendix D Block Diagram