B&B Electronics 2010 manual Appendix C Synchronous Port Connections Configured AS DTE

APPENDIX C: SYNCHRONOUS PORT CONNECTIONS (CONFIGURED AS “DTE”)

Pin	Name	Description
1	FG	Frame Ground; connected straight to asynchronous port
2	TXD	Transmit Data (from 2010); data output to synchronous
		port
3	RXD	Receive Data (to 2010); data input from the synchronous
		port; input to 2010 power supply
4	RTS	Request to Send (from 2010); 4 bit delay from
		asynchronous port (2010 waits 4 bits before dropping
		RTS to the synchronous port; this facilitates use in a
		polling environment)
5	CTS	Clear to Send (to 2010); connected straight through to
		asynchronous port
6	DSR	Data Set Ready (to 2010); connected straight through to
		asynchronous port
7	SG	Signal Ground; connected straight through to
		asynchronous port
8	CD	Carrier Detect (to 2010); connected straight through to
		asynchronous port
9	+DCV	Connected straight through to asynchronous port
10	–DCV	Connected straight through to asynchronous port
15	TXC	Transmit clock (to 2010); used to synchronize data
		conversion from 2010 to synchronous port
17	RXC	Receive clock (to 2010); used to synchronize data
		conversion from 2010 to synchronous port
20	DTR	Data Terminal Ready (from 2010); input to 2010 power
		supply
22	Rl	Ring Indicator (to 2010); connected straight through to
		asynchronous port

2010AS3297 Manual 9

B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 434-7094