Modbus Basics
An input tree appears listing all base and expansion modules in the system and the inputs available on them.
2.Select the RTD to be configured.
3.To increase speed, RTD channels may be turned on or off. If nothing is connected to the RTD channel, then uncheck the Channel Enabled option.
4.Select the RTD type as PT100, PT1000, CU10 depending on your RTD type.
5.Select if you have wired a 2, 3, or 4 wire RTD probe to the input module.
Setting the Analog Mode of one AI or AO sets all AI’s and AO’s on that module to the same mode.
Saving the Configuration
When all configuration settings are complete, click the Update button to save them in the Zlinx 485 Base and Expansion modules.
1.The Progress bar at the bottom of the windows shows the progress of the update.
2.The Status bar displays the following text:
Manual Documentation Number: