B&B Electronics Zlinx 485 manual RS-422/485 Connector, Local Bus Connector Location

Page 11

Hardware

Figure 7. Local Bus Connector Location

RS-422/485 and I/O connectors for base and expansion modules are removable (plug in) screw terminal blocks located on the front and top of the unit. Terminal spacing is 3.5

mm.Depending on the specific model, the number of terminals may vary. The maximum is 16 terminals (two 8-terminal blocks) for I/O, with an additional 5 terminals for RS- 422/485 on the base module.

The Serial Port Connector on the Zlinx 485 is an RJ45 female connector (configured as a DCE) device supporting RS-232 serial communications including TD (Pin 3 on the DB9 end), RD (Pin 2) and GND (Pin 5) signal lines. If the Modbus device you are connecting to the Zlinx Base Module is configured as a DTE device you will use a straight-through serial cable. If the Modbus device is configured as a DCE device, use a null modem cable or adapter.

Refer to Appendix C for connection pin-outs.

RS-422/485 Connector

The RS-422/485 connector on the Zlinx Base module is a five position removable terminal block with screw downs. The connector provides screw connections for:

•Terminal 1 – TDA(-)

•Terminal 2 – TDB(+)

•Terminal 3 – RDA(-)

•Terminal 4 – RDB(+)

•Terminal 5 – GND

Manual Documentation Number: Zlinx485m-1808 www.bb-elec.comwww.bb-europe.com

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Zlinx International Headquarters ZlinxTable of Contents Support Zlinx Product Family IntroductionAbout this Manual Package Checklist FeaturesZlinx 485 Modules HardwareExpansion Modules Base ModulesBase and Expansion Modules Connected Together Programming the Base Module using the RS232 connectorConnectors Indicators, Connectors and AccessoriesLED Indicators Power Supply Connector Local Bus Connector Location RS-422/485 ConnectorRS-422/485 Two-Wire Mode RS-422/485 Four-Wire ModeRS-232 Connection Power Supply RequirementsDigital Inputs Types and CharacteristicsAnalog Outputs DI WiringDigital Outputs Analog InputsDo Wiring AI Wiring RTD Wiring Relay Wiring Type Modbus Memory Address Zlinx 485 Modes of Operation Peer-to-Peer ModeModbus Mode Connecting the Hardware Zlinx Base Module 2 wire RS-485 Connections Getting Started Zlinx 485 InstallationConnecting Zlinx 485 to a PC If the device is found, the Zlinx 485 Manager window opens Zlinx 485 Manager Information TabInput/Output Tab Configuration TabConfiguring Zlinx Configuration & OperationTesting Modbus Mode Operation Peer-to-Peer Master Configuration Peer-to-Peer Mode SettingsInput/Output Settings Digital Input Configuration Analog Input Configuration Saving the Configuration Updating Zlinx 485 Firmware Firmware Updater Caution Dialog BoxModbus Basics Modbus ASCII/RTU Basics Modbus HelpHints and Tips Appendix a Product Specifications Frequency Input Accuracy @ 25ºC Dimensional Diagram of a Zlinx 485 Base Module Appendix B Dimensional DiagramsRS-232 Pinouts Appendix C Serial ConnectionsRS-422/485 4 Wire Pinouts Serial Connections Discrete Digital Outputs Appendix D Modbus I/O AssignmentsModbus I/O Assignments Modbus I/O Assignments Zlinx 485 Base Modules Model Number Module Type Appendix E Zlinx 485 Models and FeaturesProblem Causes Appendix F Zlinx 485 TroubleshootingTerm Definition Appendix G Terms and Definitions

Zlinx 485 specifications

B&B Electronics Zlinx 485 is a reliable and efficient wireless serial communication solution designed for industrial applications. This device facilitates robust data transmission over long distances, making it an ideal choice for environments where conventional wired connections may be impractical or cost-prohibitive.

One of the main features of Zlinx 485 is its ability to operate over a wide distance, reaching up to 1 mile (1.6 km) in line-of-sight scenarios. This capability significantly enhances connectivity options for remote devices and sensors, which is particularly valuable in diverse industrial setups.

The Zlinx module is built on the 802.15.4 protocol and operates in the 900 MHz frequency band, which is known for its excellent propagation characteristics and minimal interference from other wireless devices. This technology ensures reliable communication even in challenging environments, making it suitable for applications in factories, warehouses, and outdoor settings.

Another crucial characteristic of the Zlinx 485 is its versatility. The device supports both point-to-point and point-to-multipoint configurations, allowing for flexible network designs that can accommodate a variety of communication needs. This adaptability simplifies integration into existing systems while offering the scalability necessary for future expansions.

Security is a priority, and the Zlinx 485 offers various encryption options to safeguard data transmissions. With features like frequency hopping and error detection, users can be assured of secure and reliable communication, thereby maintaining data integrity across the network.

In terms of ease of use, the Zlinx 485 is designed with user-friendly interfaces that allow for straightforward installation and configuration. The modules can be easily configured using software tools provided by B&B Electronics, enabling users to set up communication parameters quickly without extensive technical expertise.

Additionally, the Zlinx 485 is robustly constructed to withstand harsh industrial environments. Its durable design and resistance to extreme temperatures make it a dependable choice for applications in demanding settings, ensuring longevity and consistent performance over time.

Overall, the B&B Electronics Zlinx 485 stands out as a powerful wireless solution that combines long-range communication, robust security features, versatility, and ease of use, making it an excellent choice for a variety of industrial applications. Its commitment to reliability and performance positions it as a leader in wireless serial communication technology.
Top Page Image Contents