Zoom MAC quick start Returning to the Factory Settings, Using AT commands in terminal mode

Page 15

Using AT commands in terminal mode

1.Start your data communications program.

2.Change to terminal mode (also called command, local, direct, or dumb mode).

3.Type in the AT command you need and press Enter.

When you finish, you can return to the data communica- tions program’s standard user interface. See the program’s documentation if you need help.

Returning to the Factory Settings

To return to the factory default settings for the modem:

In terminal mode, type AT &F and press Enter.

See the Web site at www.modems.com.

Chapter 2 Using the Faxmodem

15

Image 15

Contents MAC Copyright All rights reserved Contents Page What You Need to Use Your Faxmodem IntroductionFor some modems, you may also have received Documentation ConventionsIntroduction Installing the Faxmodem Turn the computer back on Summary of the Indicator Lights FAX Using the Faxmodem Using Other Voice, Fax, and Data Communica- tions SoftwareUsing Initialization Strings Tips for Selecting Setup Options ∙ Set auto baud detect to OFF or no Using AT CommandsUsing AT commands in terminal mode Returning to the Factory SettingsFor help with this problem… See Page… Solving Common ProblemsGeneral Troubleshooting Problem No response appears after executing a com- mand Type AT &D0 &W &Y0 and press Enter Problem Modem does not auto-answerFor highest volume Echo TroubleshootingProblem The modem speaker volume is too low or too high For low volumeConnection Troubleshooting Dial TroubleshootingAT &F On next Initialization string AT&F&C1&D2W2 Dial prefix ATW2D Problem Your modem does not make a connection Quick Start and Reference Guide Appendix a Product Summary Quick Start and Reference Guide External Appendix B Product SpecificationsFCC Part 68 Telecommunications Statement Appendix C Regulatory InformationCanadian Emissions Statement Industry Canada AttachmentDate of Purchase Store or Dealer Important InformationFaxmodem Model Serial Number