Zoom MAC quick start Documentation Conventions, For some modems, you may also have received

Page 6

∙Telephone cord to connect your faxmodem to the tele- phone line (wall jack)

∙AC power adapter

∙A Zoom Link CD-ROMdisc with communications and other software

∙Software instructions

∙Packet of online service offers

For some modems, you may also have received:

∙Microphone and speaker or earphone

To use this faxmodem, you also need the following items.

∙A Macintosh with an available serial port. Minimum requirements:

,68040 or faster Macintosh

,Macintosh OS 7.1 or later

,8 MB RAM

,Hard drive with at least 10 MB available

∙An electrical outlet to connect the power adapter

∙Mac-to-modem serial cable (may be included with the product)

∙A telephone line connection (typically, a wall-mounted telephone jack or socket) where you normally would plug in a single-line telephone

Documentation Conventions

∙In this manual we may use the terms “faxmodem,” “modem,” and “product” interchangeably to refer to your faxmodem.

∙Commands and command examples described in this guide appear in bold type. For example: To reset the modem, type ATZ and press Enter.

We occasionally insert spaces between commands to make a command line easier to read. You can type the command

6	Quick Start and Reference Guide

Image 6

Contents MAC Copyright All rights reserved Contents Page Introduction What You Need to Use Your FaxmodemDocumentation Conventions For some modems, you may also have receivedIntroduction Installing the Faxmodem Turn the computer back on Summary of the Indicator Lights FAX Using the Faxmodem Using Other Voice, Fax, and Data Communica- tions SoftwareUsing Initialization Strings Tips for Selecting Setup Options Using AT Commands ∙ Set auto baud detect to OFF or noReturning to the Factory Settings Using AT commands in terminal modeSolving Common Problems For help with this problem… See Page…General Troubleshooting Problem No response appears after executing a com- mand Problem Modem does not auto-answer Type AT &D0 &W &Y0 and press EnterFor low volume Echo TroubleshootingProblem The modem speaker volume is too low or too high For highest volumeDial Troubleshooting Connection TroubleshootingAT &F On next Initialization string AT&F&C1&D2W2 Dial prefix ATW2D Problem Your modem does not make a connection Quick Start and Reference Guide Appendix a Product Summary Quick Start and Reference Guide Appendix B Product Specifications ExternalAppendix C Regulatory Information FCC Part 68 Telecommunications StatementIndustry Canada Attachment Canadian Emissions StatementSerial Number Important InformationFaxmodem Model Date of Purchase Store or Dealer