Optimus 120-2117 guide

Using an Adapter Harness

If you are replacing an existing stereo, or if your vehicle has been factory-wired for auto sound components, you might be able to use an adapter harness to connect the power and speakers.

Follow the directions supplied with the adapter harness to temporarily connect the power and speakers.

A selection of adapter harnesses is available at your local RadioShack store.

Connecting Ground, Power, and Optional Components

Follow these steps to connect the supplied harness with the 14-pin connector to ground, primary and optional components.

1.Disconnect the cable from your vehicle battery's negative (-) terminal.

2.Connect the black GROUND (-) wire to a chassis ground, such as a metal screw attached to a metal part of the vehicle's frame. Be sure that the screw is not insulated from the chassis by a plastic part.

3.Connect the red +12V TO IGNITION wire (with the in-line fuse holder) to a point in your vehicle's fuse block that has power only when you turn the vehicle's ignition key to either the accessory (ACC) or ON position.

This connection turns on the stereo when you turn on the ignition or turn the key to ACC, and turns off the stereo when you turn off the ignition. This prevents your vehicle's battery from being drained if you leave the stereo on when you turn off the ignition.

4.Connect the yellow +12V TO BATTERY wire (with in-line fuse holder) to your vehicle battery's positive (+) terminal or to a point in your vehicle's fuse block that provides a continuous source of 12 volts.

This connection provides continuous power for the stereo's LED indicator when the faceplate is removed.

5.Cut the loop at the end of the blue AMP REMOTE TURN ON 500MA MAX wire, strip about 1/2 inch of insulation from its end, then connect it to any optional equipment (designed to run from a switched source) that you want the stereo to turn on and off (such as a power antenna).

120-2117 specifications

The Optimus 120-2117 is an innovative piece of technology designed to enhance performance and efficiency in various applications, particularly in the realm of industrial automation and control systems. This advanced device is characterized by its robust features, cutting-edge technologies, and exceptional capabilities that make it a standout choice for businesses seeking to optimize their operations.

One of the main features of the Optimus 120-2117 is its user-friendly interface, which allows operators to easily navigate through settings and configurations. The device is equipped with a high-resolution touchscreen display, providing clear visibility of real-time data and system status. This intuitive design minimizes the learning curve for new users, enabling quick implementation and maximizing productivity from the outset.

The Optimus 120-2117 integrates seamlessly with a range of industry-standard communication protocols, including Ethernet/IP, Modbus TCP/IP, and PROFINET. This versatility ensures that the device can be easily integrated into existing networks, allowing for smooth data exchange between various system components. Furthermore, its compatibility with IoT technologies makes it suitable for smart factory applications, where data analytics and remote monitoring are essential for maintaining operational efficiency.

Another notable characteristic of the Optimus 120-2117 is its high-performance processing capabilities. Powered by a multi-core processor, the device is designed to handle complex computations and real-time data processing with ease. This ensures that even in high-demand environments, the Optimus 120-2117 can deliver reliable performance without compromising on speed or accuracy.

In terms of durability, the Optimus 120-2117 is built to withstand harsh industrial conditions. Its rugged design and high IP rating provide protection against dust and moisture, making it suitable for a variety of environments, from manufacturing floors to outdoor installations. Additionally, the device features robust security protocols to protect sensitive data and ensure compliance with industry standards.

With its blend of advanced features, flexible connectivity options, and robust design, the Optimus 120-2117 is positioned as a leading solution for businesses aiming to enhance their automation and control processes. Whether in manufacturing, logistics, or any other sector that relies on precise control systems, the Optimus 120-2117 is an investment in efficiency and reliability.