CASSETTE DECK OPERATION
The system has one cassette deck for normal cassette tape playback and re- cording.
The deck has a
LOADING A CASSETTE TAPE
1.Take up any slack in the tape by turning the cassette’s hub with a pencil. If you do not remove ex- cess slack, the tape might be- come tangled in the record/ playback mechanism. Avoid touching the tape.
show pencil in cassette hub
2.Press STOP/EJECT 
to open the cassette compartment door.
3.Insert the cassette tape into the tape guides in the compartment door, with its exposed tape edge facing down, the side you want to play facing you, and its full reel to the left.
4.Close the compartment door.
PLAYING A CASSETTE TAPE
After loading a cassette tape, follow these steps to play it.
1.Set FUNCTION to TAPE.
2.Press PLAY 
. The tape plays un- til it reaches the end of the side, then it automatically stops.
show PLAY location
Notes:
•To temporarily stop playback, press PAUSE y . Press PAUSE y again to continue playback.
show STOP/EJECT location | show PAUSE location |
|
15