CD PLAYER OPERATION
LOADING A CD
1.Slide FUNCTION to CD.
show FUNCTION set to CD
2. Lift the CD compartment cover.
4.After you load the CDs, close the CD compartment cover. The sys- tem displays the current tray num- ber and the number of tracks on the CD in that tray.
Notes:
•Track number 00 and the current tray number appear while the sys- tem checks each tray.
•If no CDs are installed, no appears.
Note: The CD carousel has three trays, each labeled with numbers, but only two trays are exposed when you open the CD compart- ment.
3.Place a CD in either (or both) of the exposed trays, label side up.
To load a CD in the third tray, press DISC SKIP. The carousel ro- tates, exposing the other tray.
show DISC SKIP location
PLAYING A CD
After loading a CD, follow these steps to play it.
1.Press PLAY/PAUSE 
.
show PLAY/PAUSE location
The CD in the current tray begins to play from Track 1. The system displays 
, the current tray num- ber, and the CD’s current track number.
Notes:
•If a tray does not contain a CD, the system skips that tray and automatically plays the CD in the next tray.
9