Active: The port automatically sends LACP protocol packets.
Passive: The port responds only if it receives LACP protocol packets from the opposite device.
[NOTE]
1.A link having either two active LACP ports or one active port can perform dynamic LACP trunk.
2.A link, which has two passive LACP ports, will not perform dynamic LACP trunk because both ports are waiting for an LACP protocol packet from the opposite device.
Port Trunk – State Activity interface
Port Mirroring
Port mirroring is a method to monitor traffic in switched networks. Traffic flowing through the indicated ports can be monitored by a specified port.
Destination Port: Only one port can be selected as the destination (mirror) port for monitoring both RX and TX traffic from the source port. Two ports may be configured to monitor RX and TX traffic separately. A LAN analyzer can be connected to the mirror port.
Source Port: Select the ports to monitor. All monitored port traffic will be sent to the mirror (destination) port. Multiple source ports by can be selected by checking the RX or TX check boxes.
Click Apply 
66 | Manual Documentation Number: |
| |
| B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph |
| B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 |