B&B Electronics EIR505-XX manual Hardware Installation

Hardware Installation

.

1.Unpack the Industrial switch.

2.Ensure the DIN-Rail is tightly screwed to the Industrial switch. If not, refer to DIN-Rail Mounting section for DIN-Rail installation. To panel mount the Industrial switch, refer to Panel Mounting section.

3.Apply power to the switch (refer to the Wiring the Power Inputs section). The power LED will light.

4.Connect CAT 5 cables to the Industrial switch’s RJ-45 ports and to the network devices.

[NOTE] If the network devices do not support MID/MDIX, a crossover cable may be required.

5.Connect the fiber optic cables to the industrial switch and network device. Ensure that the switch’s fiber optic transmitter is connected to the network devices receiver and vice versa.

6.When all the connections are made and the LEDs show normal indications, the installation is complete.

14	Manual Documentation Number: EIR505-xx_5107m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax	815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444	– Fax +353 91-792445 – www.bb-europe.com