B&B Electronics EIR505-XX manual Rstp Configuration, System Configuration

Page 46

IP Security Interface

RSTP Configuration

The Rapid Spanning Tree Protocol (RSTP) is an evolution of Spanning Tree Protocol (STP). It provides a faster spanning tree convergence after a topology change. The switch will auto detect a device that is running STP or RSTP protocol.

System Configuration

Modify RSTP state parameters

„RSTP mode: Enable or disable RSTP function.

„Priority (0-61440):a value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. If the value changes, the switch must be rebooted. The priority value must be multiple of 4096 according to the protocol standard rule.

„Max Age (6-40):the number of seconds a bridge waits without receiving Spanning-tree Protocol configuration messages before attempting a reconfiguration. Enter a value between 6 and 40.

36

Manual Documentation Number: EIR505-xx_5107m

 

 

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax

815-433-5104www.bb-elec.com

 

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444

– Fax +353 91-792445www.bb-europe.com

Image 46
Contents Product Description Page Five Port Managed Industrial Ethernet Switches Kernel Version Firmware VersionHardware Version FCC Warning CE Mark WarningContent Wall Mount Plate Mounting Igmp Troubles shooting Technical Specification Page Features IntroductionPackage Contents Hardware Description Physical DimensionReset Button Front PanelDIP Switch No Status Description DIP-switchBottom View LED Indicators Status Meaning Power Green Switch is onPorts Pin MDI-X Signal Name MDI Signal Name RJ-45 Pin Assignments Pin NumberCabling „ Fiber PortWiring the Power Inputs Wiring the Fault Alarm Contact 1A@24VMounting Installation DIN-Rail MountingManual Documentation Number EIR505-xx5107m Panel Mounting Hardware Installation Network Application Ring ApplicationCoupling Ring Application Dual Homing Application About Web-based Management Web-Based ManagementPreparing for Web Management Panel Figure Display Configuration Display Screen System LoginFunction Menu Bar Port status Single Port InformationPort Statistics Port Control Port Control interfaceSwitch Settings Port Mirroring Port Mirroring interfaceVlan configuration Port-based VlanVlan Port Base interface 802.1Q Vlan „ Basic Click Next to bring up the configuration interface To reset to the default values, click IP Address Sntp Configuration Local Time Zone Conversion from UTC Time at 1200 UTCManual Documentation Number EIR505-xx5107m GST IP Security Rstp Configuration System ConfigurationRSTP- System Configuration Interface Per Port Configuration Ring Manual Documentation Number EIR505-xx5107m QoS Configuration Manual Documentation Number EIR505-xx5107m Igmp Report Message DescriptionQuery Leave GroupTftp Restore Configuration Configuration BackupSecurity Manager Tftp Backup Configuration Tftp Update FirmwareTftp Server IP Address Enter the Tftp server IP Factory Default System RebootSave Configuration Rate ControlQos and Rate control cannot exist at the same Trouble shooting Technical Specification Class of service SC Single mode 9/125um~10/125umPower Supply Network CableSpanning tree Quality of serviceRing Management IPFirmware update InstallAlarm Temperature Case DimensionSafety Stability testing