The Hot Key is a sequence of three keys that must be pressed simultaneously to switch from one Smart Switch Port to another. For example, the hot key sequence, <Left Shift> <ALT> <ABCDN> states that the left shift, Alt, and either A, B, C, D, or N must be pressed at the same time to select the corresponding Smart Switch Port. N turns off all Smart Switch ports.
Default Values
If you type SSTSR on the command line with no parameters, or omit any parameters, the default value of the missing parameter will be used. The default values are:
Description | Default Value | |
Port Address | 02F8h (COM 2) | |
Baud Rate | 7 | = 9600 |
Parity | 0 | = No Parity |
Data Bits | 8 | = 8 Data Bits |
Second Character | 2 | = STX (CTRL B) |
Hot Key Sequence | 1 | = <Left Shift><ALT><ABCDN> |
Help Screen
If you are installing the SSTSR using the SSTSR.COM method, you can type SSTSR ? and press the ENTER key to obtain a list of the commands and their options.
Un-Install
The SSTSR may be
Selecting Ports
There are two different ways in which a Smart Switch port is selected, either through the command line or by pressing the predefined hot key sequence after the SSTSR was installed. When a request to change ports is made, using either method, first the current port is turned off, then the port selected is turned on. The two methods are described as follows:
Documentation Number | 17 |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353