B&B Electronics 232XS5 manual Method One, Method Two, Description Default Value Port Address

Page 10

Chapter 4: SOFTWARE

Introduction

The Smart Switch software allows the user to change Smart Switch ports on three different modules (232XSS, 232XS5, PortMUX). The Smart Switch software is designed as diagnostic software for the above modules. It will allow you a Module by Module connection to the individual port.

Installation

The software for the Smart Switch is designed to be run in any Windows environment. To install it on your hard drive follow these steps:

Method One

Install the software media.

Select Settings from the Start Button and click on Control Panel.

In the Control Panel Window, double click on the Add/Remove Programs.

Click on the “Install” button.

Follow the instructions of the setup program.

Method Two

Install the software media.

Select Programs from the Start Button and click on Windows Explorer.

Click on the drive containing the software.

Double click on the file “Setup.exe”.

Follow the instructions of the setup program.

The following file will be located on your hard drive:

SS.EXE - The executable file for the Smart Switch.

FILES.LST Contains a list and description of files installed on your hard drive.

READ.ME Contains corrections and additions to the printed users manual.

HISTORY.LST Contains a historic description of the product.

Setup

The Smart Switch program will prompt the user for the Module that is in use the first time that the software is run. After the proper Module (i.e. PortMUX, 232XS5,etc.) is selected then a window specific to that Module will appear and the user may personalize communication parameters as per their specific needs. Comport, Baud Rate, and Data Bits (Character Mode, and User Defined Character may also be set for 232XSS and 232XS5 Modules).

232XS5-1005 Manual

15

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

Should the user wish to change the Module choice to another there is a Module menu choice with the three support Module types (PortMUX, 232XSS, and 232XS5). After changing the Module the user will be prompted to restart the Smart Switch software to reset the connection.

Default Values

When you start Smart Switch software, the default values will be used. The default values are:

Description

Default Value

Port Address

COM 1

Baud Rate

9600

Data Bits

8

Data Bits

Second Character

2

= STX (CTRL B)

Selecting Ports

To select a port the user need only pick from the Menu-> Comport the comport to which the device is attached. The Smart Switch program supports comports 1 through 6. If the port exists but does not have a smart switch device attached, SS will not detect it. The SS software will only detect invalid/undefined comports.

Parameters

The Port Address is the address where the serial communications port is located. If this is unknown you can use the program PORTFIND.EXE which is located in the provided software. To use PORTFIND.EXE:

If you installed the software on your hard drive see the Installation section:

Type C: and press the ENTER key.

Type CD\SS\UTIL and press the ENTER key.

Type PORTFIND and press the ENTER key.

The result will be similar to the following:

PortFind V1.03 - © 1991 B&B Electronics - All Rights Reserved. Slave 8259 present can't use shared IRQ2

COM1 at address 03F8h is set for IRQ4 and is a 8250A or 16450 type UART COM2 at address 02F8h is set for IRQ3 and is a 8250A or 16450 type UART LPT1 at address 0378h found

Some of the typical port addresses are as follows:

16

232XS5-1005 Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

Image 10
Contents Five Port Expandable Smart Switch Table of Contents Introduction ChecklistSpecifications Model 232XS5Communication & Port Setup Dipswitch SW1 Setting SetupPort Configuration Mode Setup Jumper JP6 SettingDCE DTE Serial Data ConfigurationRS-485 Support DTE DCEWeight Smart Switch OperationProgrammable Character Setting Programming the Second CharacterSmart Switch/Port Combiner Mode Enhanced Timer Mode -- Timer FeaturesTimer Values 232XS5 Smart Switch Mode Commands232XS5 Expander Mode Commands Expansion ModeESC STX C B Method Two Description Default Value Port AddressMethod One Baud Rate 9600 Data Bits Second CharacterCOM 232XS-1005 Manual Appendix a 232XS5-1005 Manual Appendix a Ascii Character CodesDecimal to HEX to Ascii Conversion Table Appendix B Cable Charts IBM PCSignal Ports a E DTE Chart 5. IBM PC DB25 Connector to Ports a E DCEChart 6. IBM PC DB9 Connector to Ports a E DTE Chart 7. IBM PC DB9 Connector to Ports a E DCEChart 9. IBM PC DB9 Connector to Ports a E DCE 232XS5-1005 Manual Appendix B
Related manuals
Manual 26 pages 9.88 Kb

232XS5 specifications

B&B Electronics 232XS5 is a state-of-the-art Five Port Expandable Smart Switch, designed to provide businesses with enhanced connectivity options and efficient network management. This robust switch addresses the growing needs for high-performance networking in various applications, including industrial, commercial, and residential settings.

One of the main features of the 232XS5 is its ability to expand with additional ports. Users can easily increase their connectivity by adding more devices as their network requirements change, which ensures a future-proof solution without the need for a complete system overhaul. This flexibility makes it an ideal choice for organizations anticipating growth or changes in their networking needs.

The switch supports a range of advanced technologies designed to optimize performance. With its Layer 2 switching capabilities, the 232XS5 can efficiently manage data traffic, ensuring smoother communication between connected devices. Its support for auto-negotiation and auto-MDIX simplifies installations, automatically configuring each port to the appropriate speed and cable type, thereby reducing setup time and potential errors.

Another notable characteristic of the 232XS5 is its robust security features. The smart switch includes VLAN support, which allows network administrators to segment traffic and enhance security by isolating sensitive data transmissions. Additionally, it supports port security features, enabling organizations to restrict access to specific devices, thus preventing unauthorized access and potential breaches.

Energy efficiency is also a key component of the B&B Electronics 232XS5. The switch employs energy-saving technologies that reduce power consumption without compromising performance. This not only lowers operational costs but also supports sustainability initiatives, making it a responsible choice for environmentally-conscious businesses.

Furthermore, the switch's compact design and solid construction ensure durability in demanding environments. Whether deployed in an office space or an industrial setting, the 232XS5 is built to withstand various conditions, ensuring reliable operation over time.

Overall, the B&B Electronics 232XS5 Five Port Expandable Smart Switch combines flexibility, advanced features, and robust security, making it a compelling solution for any organization looking to enhance its networking capabilities. With its easy expandability and commitment to energy efficiency, it is a smart investment for the future of networking.