Package Contents | Black & Decker SM015-2AMPS instruction

SM015-2AMPS VSM 4 Hole AMPS Adapter Mount with Universal Phone Cradle

Patented

AP032

Dual-T to 4-hole AMPS Adpter plate

SM015-2

Universal

Phone Cradle

Package Contents:

(1) SM015-2 - Universal Phone Cradle

(1)AP032 - Dual-T to 4-hole AMPS adapter plate with screws and nuts

!Do not place mount in or near an air bag deployment zone.

Console Mounting VSM Bracket

Step 1. Find a safe location on the console to install the vehicle specific mount (VSM) sold by other manufacturers. The VSM bracket is not included in this kit. Follow the manufacturers instructions for installing VSM bracket.

Connect Adapter plate AP032 to VSM Bracket

Step 1. Place the Dual-T to 4-hole AMPS adapter plate against the VSM bracket. Using a screwdriver, tighten the screws into the nuts behind the adapter plate. See diagram below.

Connect Mobile Phone Cradle to VSM Mount

Step 1. Connect the Dual-T slots (A) on the back of the phone cradle to the Dual-T tabs (B) on the Dual-T to 4-hole AMPS adapter plate.

Device Insertion and Removal from Cradle

Step 1. Insert your phone or device into the cradle with the device sitting on the adjustable support legs (C). Squeeze the grip arms (D) inward to firmly grasp the device. Press the release button (E) to open the arms.

C E

Safety Precautions

! Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsi- bility of liability for injury or death as a result of car crashes and / or air bag deployment.

Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.

	The Mobile Mounting Specialists™
Consumer Hotline:		www.arkon.com
USA	(800) 841-0884	Arcadia, CA 91006 USA
INT’L	(626) 254-9005	Designed in USA Made in Taiwan
Monday - Friday 9 am - 5 pm, PST		© Copyright 2010 Arkon Resources, Inc.