Lights Out™ Auto Switch
INSTRUCTION MANUAL
Catalog Number
•Turns off the light if the room becomes brighter, for instance due to opening a window shade. You can control the brightness setting for this feature.
Selecting Where to Use the Auto Switch
The Lights Out™ Auto Switch can be installed on
Use the Auto Switch in a location where the light switch has a clear view of room occupants, and where occupants are likely to be moving within range of the detector. Note that the Auto Switch will turn the lights off if it does not detect motion within the selected time period. The Auto Switch is especially useful in areas where a light is likely to be left on unnecessarily.
Ideal locations are entry ways, bathrooms, garages, offices, basements and playrooms. The Auto Switch is not compatible with the following:
•
•
•Toggle switches with
•
•Dimmer switches
SW100
Thank you for choosing Black & Decker! Go to www.BlackandDecker.com/NewOwner to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you can’t find the answer or do not have access to the internet,
FEATURES
A.) Motion Detector
B.) Motion Detector Shade
C.) Manual On/Off Switch
D.) Timer Switch
E.) Ambient Light Switch
F.) Power Switch
G.) Polarity Switch
H.) Battery Compartment
I.) Battery Compartment Cover
J.) Mounting Plate
1 |
A |
C |
E |
D |
H |
I |
F
G 
call
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
Cat No. SW100 | Form # 90539953 | (OCT.’08) |
Copyright © 2008 Black & Decker | Printed in China | |
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR
SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
J
B
Assembly/Set-up
This product requires three AA batteries (not included).
Installing the Batteries
NOTE: Use only with the specifically designated batteries (AA
•Open the battery compartment cover (I) as shown in figure 1.
•Insert batteries in the orientation indicated, making sure to match (+) and
Instructions for Mounting to a Switch
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
WARNING: To reduce risk of injury, user must read and understand instruction manual.
WARNING: To reduce the risk of shock, remove this device and disconnect branch circuit when servicing switch or light fixture.
WARNING: Do not use on a switch that controls a power receptacle.
•Use with
•For indoor use only.
•Not for use where the light fixture is controlled by more than one switch (a
WARNING: Fire or burn hazard. Batteries can explode or leak, and can cause injury or fire. To reduce this risk:
•Carefully follow all instructions and warnings on the battery label and package.
•Always insert batteries correctly with regard to polarity (+ and
•Do not short battery terminals.
•Do not recharge.
•Do not mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and type.
•Remove dead batteries immediately and dispose of per local codes.
•Do not dispose of batteries in fire.
•Keep batteries out of reach of children.
•Remove batteries if the device will not be used for several months.
"Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) prohibits transporting batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulat- ed from materials that could contact them and cause a short circuit.
SAVE THESE INSTRUCTIONS
Introduction
The Lights Out™ Auto Switch will reduce your electricity usage and save you money by turning off a light when it is not needed. It uses motion and light detectors to automatically control an existing
The Auto Switch performs these functions:
•Turns on the light when motion is detected.
•Turns off the light when no motion has been detected for a selectable time period.
•Does not turn on lights if the room is already illuminated with sunlight. You can control the brightness setting for this feature.
2
Tape
Ruban adhesif
Cinta
3
NOTE: Do not install where more than one light switch controls a single light fixture (a
•Note whether the light turns on when the switch is flipped up, or when the switch is flipped down. The Auto Switch can be configured for either case.
•Use a piece of tape (not included) to tape the switch plate in place before the screws are removed. See figure 2. You can skip this step if the switch plate is held to the wall with more than two screws (for example, when there is more than one switch.)
•Remove the two screws from above and below the switch you want to control.
•Orient the mounting plate as shown in