Avocent PM IPDU manual Accessing the Console, Direct console access, To daisy chain a PM Ipdu

Page 19

Chapter 2: Installation

9

 

 

To daisy chain a PM IPDU:

This procedure assumes that a main PM IPDU is already connected to a workstation or management appliance.

1.Connect one end of an RJ-45 cable to the OUT port of the main PM IPDU, which is connected to a workstation or management appliance.

2.Connect the other end of the RJ-45 cable to the IN port of the secondary Cyclades PM IPDU.

3.Repeat these steps until you have connected the desired number of PM IPDUs.

Accessing the Console

Users and administrators may access the PM IPDU either by making a direct console connection to the PM IPDU’s IN port or by connecting the PM IPDU to an Avocent console or KVM switch management device.

Direct console access

While using the PM IPDU device independently of other Avocent devices, local users may connect directly to the system console port (the IN port) of the PM IPDU using the console cable with the corresponding adaptor(s).

The system administrator must specify basic settings on the PM IPDU before users may connect to and manage the unit and the connected devices. To perform necessary basic configuration, make a direct connection to the PM IPDU by connecting a terminal or computer to the IN port.

To access the console:

Perform the following steps to connect a computer to the console port of the PM IPDU. This procedure assumes that you know how to use a terminal emulation program.

1.Connect an RJ-45 serial cable to the IN port on the PM IPDU.

2.Connect the RJ-45 serial cable to a computer with a terminal emulation program using the RJ- 45 to DB-9F straight-through adaptor or a USB serial adaptor.

3.Using a terminal emulation program, connect to the PM IPDU with the following settings: ANSI emulation, 9600 bps, 8 bits, no parity, 1stop bit and no flow control.

When prompted, enter the username admin with the default password pm8.

If this is a first-time installation, see Initial configuration using the command prompt on page 10 for instructions on changing the default password, adding users and assigning outlets to users.

Console access through a management device

By integrating the PM IPDU device with an Avocent console or KVM switch management device such as DSView 3 software or Cyclades ACS, remote users may access the PM IPDU's console port through a menu-driven interface. Using Telnet or SSH through the console server, type the

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Cyclades P M Ipdu Canadian DOC Notice FCC Warning StatementCyclades PM Ipdu Power On Table of Contents Appendices List of Figures Viii Cyclades PM Ipdu Installer/Administrator/User Guide List of Tables Cyclades PM Ipdu Installer/Administrator/User Guide Support for daisy chaining Features and BenefitsAlarms and monitoring Sequential power applicationStandalone configuration Hardware Configuration OptionsIntegration with Avocent management products Integrated configuration Daisy chained configurationCyclades PM Ipdu Installer/Administrator/User Guide Getting Started Modular input power cables for the PM IpduSupplied with the PM Ipdu Optional outlet cable package Rack Mounting the PM IpduTo mount the PM10 Ipdu or PM10i Ipdu Installation environmentDaisy Chaining PM IPDUs To access the console Accessing the ConsoleDirect console access Console access through a management deviceDefault configuration parameters Configuring the PM IpduInitial configuration using the command prompt Upgrading the PM Ipdu firmware Resetting the admin passwordTo upgrade PM Ipdu firmware Number of PM IPDUs Daisy chained PM IPDUs in the login promptPM Ipdu User Interface Logging in to the PM IpduArguments Commands AdduserAlarm SyntaxAssign Current BuzzerCurrentprotection Cycle CurrsegExample Deluser DbsyncDisplay Exit Help FactorydefaultsHwocp HumidityTurns overcurrent protection off normal operation Interval Lock ListName Off Passwd RebootSave RestoreArguments Examples Syslog StatusTemperature Unlock UnassignVer UpgradeVoltage Whoami Cyclades PM Ipdu Installer/Administrator/User Guide Appendix a Specifications Interface Pinouts Safety Instructions Appendix B Safety InstructionsSicherheitsanweisungen Istruzioni di Sicurezza Instrucciones de seguridad Instruções de SegurançaInstructions de sécurités PM Ipdu Units with One Circuit Breaker Appendix C Circuit BreakersPM10i Ipdu PM10i-L30A Ipdu PM20-L30A Ipdu PM10i-32A Ipdu and PM10i-32Au IpduPM20i-L30A Ipdu PM20i-32A Ipdu and PM20i-32Au Ipdu Circuit breaker trip time Appendix D Technical Support To resolve an issueCyclades PM Ipdu Installer/Administrator/User Guide Page 590-667-501B

PM IPDU specifications

Avocent PM IPDU (Intelligent Power Distribution Unit) is a cutting-edge solution designed for efficient power management and monitoring in data centers and IT environments. These devices are essential for businesses aiming to optimize power consumption, enhance uptime, and improve overall operational efficiency.

One of the primary features of the Avocent PM IPDU is its ability to provide real-time monitoring of power usage at the outlet level. This granularity allows IT professionals to track the power consumption of individual devices and make informed decisions regarding resource allocation and load balancing. The device supports multiple power distribution configurations, making it versatile enough to suit a variety of setups.

Incorporating advanced technologies, the Avocent PM IPDU supports intelligent alerts and notifications, enabling proactive management of potential power-related issues. Users can configure customizable thresholds for power consumption, and the system will automatically send alerts if these thresholds are breached. This proactive approach helps in minimizing downtime and averting potential outages.

Another notable characteristic is the comprehensive remote management capabilities of the Avocent PM IPDU. Users can access the unit's management interface via a web-based portal, which provides intuitive dashboards displaying real-time data on power usage, temperature, and environmental conditions. This remote access feature is essential for IT teams managing distributed environments or multi-site operations, as it facilitates quick and effective responses to power concerns.

The Avocent PM IPDU also integrates seamlessly with existing management systems, offering compatibility with various standards and protocols. This interoperability ensures that organizations can leverage their current infrastructure while enhancing their power management capabilities. Additionally, the unit supports power metering and reporting features, enabling detailed analysis of energy consumption trends over time.

Furthermore, Avocent PM IPDU models come equipped with features such as outlet-level control, allowing IT administrators to perform remote power cycling, thus increasing operational efficiency and reducing the need for on-site visits. The units are designed with robust security features, including customizable user permissions and encryption protocols, ensuring that power management operations are protected from unauthorized access.

Overall, the Avocent PM IPDU is an essential tool for organizations striving to improve their power management practices. With its advanced monitoring, remote management capabilities, and robust security features, it is well-suited for modern data center environments where efficiency, reliability, and operational effectiveness are paramount.
Top Page Image Contents