Chapter 3: Accessing the PM IPDU via the Command Line Interface | 29 |
|
|
without a parameter reboots the first unit in a chain, not all the units in a chain. This command is available to the admin user only.
Syntax
reboot [<IPDU#><IPDU_ID>]
Arguments
<IPDU#> | IPDU number in a daisy chain |
<IPDU_ID> | Identification string previously set by the id command |
Examples
To reboot the first unit of the chain, or to reboot the unit in standalone mode, enter:
pm>reboot
To reboot the a specific IPDU in the chain (IPDU 2 shown), enter:
pm>reboot 2
restore
The restore command restores the configuration currently saved in Flash. This command is available to the admin user only.
Syntax
restore
Arguments
N/A
Examples
To restore the configuration currently saved in Flash, enter:
pm>restore
save
The save command saves the current configuration in the Flash device built in to all PM IPDU units. This command saves the username/password database and the specific information pertaining to each outlet such as outlet name, outlet assignments and outlet state. This command is available to the admin user only.