Blade ICE G8000 manual Configuring the Switch, Configuration Steps

Page 19

CHAPTER 3

Configuring the Switch

The Blade OS Browser-Based Interface (BBI) can be used to view and change switch configuration parameters. The same configuration parameters that are available through the switch’s command-line interface are present on the BBI configuration forms.

The following provides a basic outline for switch configuration. You should first be familiar with configuration as covered in the Blade OS Command Reference manual.

Note – You must be logged in using the administrator account in order to change switch configuration settings.

Configuration Steps

Follow these basic steps for viewing or configuring switch parameters:

1.Click the Configure context tab in the BLADE OS toolbar:

BMD00139, November 2009

19

Image 19

Contents BBI Quick Guide Blade OS 5.1 BBI Guide Contents Dashboard „ Who Should Use This Book PrefaceRelated Documentation AaBbCc123 Typographic ConventionsHow to Get Help Blade OS 5.1 BBI Guide Getting Started FeaturesRequirements Web Browser Set Up Switch Set UpStarting the BBI 12 „ Getting Started Blade OS 5.1 BBI Guide 14 „ Getting Started Browser-Based Interface Basics Context Tabs ToolbarNavigation Window Message Window Forms WindowConfiguration Steps Configuring the Switch20 „ Configuring the Switch Using the BBI to Load Switch Software Switch Image and Configuration Management page appears Get Image 24 „ Configuring the Switch Steps for Displaying Statistics Viewing StatisticsView the statistics in the forms window. For example Steps for Displaying Dashboards DashboardView information shown in the forms window. For example

Related manuals

Manual 145 pages 21.85 Kb