Blade ICE G8000 manual Using the BBI to Load Switch Software

Page 21

BLADE OS 5.1 BBI Guide

Using the BBI to Load Switch Software

You can use the Browser-Based Interface to load software onto the G8000. The software image to load can reside in one of the following locations:

FTP server

TFTP server

Local computer

After you log onto the BBI, perform the following steps to load a software image:

1.Click the Configure context tab in the BLADE OS toolbar:

2.In the Navigation Window, select System > Config/Image Control.

BMD00139, November 2009

Chapter 3: Configuring the Switch 21

Image 21

Contents BBI Quick Guide Blade OS 5.1 BBI Guide Contents Dashboard „ Preface Who Should Use This BookRelated Documentation AaBbCc123 Typographic ConventionsHow to Get Help Blade OS 5.1 BBI Guide Features Getting StartedRequirements Web Browser Set Up Switch Set UpStarting the BBI 12 „ Getting Started Blade OS 5.1 BBI Guide 14 „ Getting Started Browser-Based Interface Basics Context Tabs ToolbarNavigation Window Message Window Forms WindowConfiguration Steps Configuring the Switch20 „ Configuring the Switch Using the BBI to Load Switch Software Switch Image and Configuration Management page appears Get Image 24 „ Configuring the Switch Steps for Displaying Statistics Viewing StatisticsView the statistics in the forms window. For example Steps for Displaying Dashboards DashboardView information shown in the forms window. For example

Related manuals

Manual 145 pages 21.85 Kb