AXIS 243Q Blade Installation Guide | Page 9 |
Resetting to the Factory Default Settings
This will reset all the parameters in all 4 units (including all four IP addresses) to the factory default settings.
1.Disconnect power.
2.Press and hold the Control button and reconnect power.
3.Release the button when the Status Indicator displays red (which may take up to 15 seconds). When the Status Indicator changes to Green (which may take up to 1 minute), the process is complete and the unit 4 has been reset.
4.
LED Indicators
Control button
ENGLISH
To reset an individual unit to the original factory default settings, use the button provided in that unit’s web interface. For more information, please see the online help.
Further information
The user’s manual is available from the Axis Web site at www.axis.com or from the Axis Network Video Product CD supplied with this product.
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your AXIS 243Q Blade. To see the currently installed firmware version, see the Basic Configuration web page in the product’s Setup tools.