Avaya 2520-24-POE manual Abstract

Page 1

Avaya Solution & Interoperability Test Lab

Application Notes for the HP ProCurve 2520-24-PoE Switch Supporting Power over Ethernet with Avaya Endpoints

Issue 1.0

Abstract

These Application Notes describe the procedures for configuring the HP ProCurve 2520-24- PoE Switch to provide inline Power over Ethernet (PoE) to Avaya 1600/5600/9600 Series IP Telephones.

Information in these Application Notes has been obtained through DevConnect compliance testing and additional technical discussions. Testing was conducted via the DevConnect Program at the Avaya Solution and Interoperability Test Lab.

TMA; Reviewed:

Solution & Interoperability Test Lab Application Notes

1 of 10

SPOC 11/16/2009

©2009 Avaya Inc. All Rights Reserved.

ProC2520-24PoE

Image 1
Contents Abstract Introduction Reference ConfigurationHP ProCurve 2520-24-PoE Switch and Avaya IP Telephones Equipment Software/Firmware Avaya PBX Products Equipment and Software ValidatedAvaya Telephony Sets ProCurve ProductsGeneral Test Approach and Test Results Configure the ProCurve 2520-24-PoE SwitchClass PSE Output Max. Power W Ieee 802.3af Class and Measured PowerIeee 802.3af Classes Verification Steps ProCurve Switch 2520-24-PoE#show power-over-ethernet briefConclusion Additional References Issue Date Reason 11/16/2009 Initial issueChange History Avaya Inc. All Rights Reserved