1. Introduction
Power over Ethernet (PoE) allows both power and data to be simultaneously carried over standard Ethernet cables.
1.1. Interoperability Compliance Testing
The interoperability testing focused on verifying PoE interoperability with the ProCurve 2520-
The power tests included verification of the following after each powered device was connected to the switch:
∙Successful boot operation.
∙Connecting a mix of Avaya IP Telephones to the switch, power cycling the switch and verifying successful boot operation of the PDs and registration of the telephones.
1.2.Support
For technical support on ProCurve products, consult the support pages at: http://www.procurve.com/customercare/support
2. Reference Configuration
As illustrated in Figure 1, the Avaya PDs covered in these Application Notes include the following:
∙Avaya 9600 Series IP Telephones
∙Avaya 5600 Series IP Telephones
∙Avaya 1600 Series IP Telephones
For compliance testing, the Avaya 1600/9600 Series IP Telephones registered to Avaya AuraTM Communication Manager and the Avaya 5600 Series IP Telephones registered to Avaya IP Office.
See Table 1 for a detailed list of specific models tested:
TMA; Reviewed: | Solution & Interoperability Test Lab Application Notes | 2 of 10 |
SPOC 11/16/2009 | ©2009 Avaya Inc. All Rights Reserved. |