Optimus STAV-3690, 31-3040 Using Advanced Sound Options, Center Mode Setting, Test Tone

Page 22
CENTER MODE

Using Advanced Sound Options

Sound Mode Adjustments (Remote Control Only)

Note: If you do not use a center speaker, the monaural signals are only repro- duced if you select PHANTOM.

Center Mode Setting

The center mode setting affects the center channel’s bass signals. It operates only when you select Dolby Pro Logic Surround Sound. Each time you press

on the remote control, the setting changes and the receiver dis- plays: NORMAL, WIDE, PHANTOM, or 3CHLOGIC.

NORMAL — Select this mode if you use a small center speaker. The front left and right speakers play the center-channel bass sounds.

WIDE — Select this mode if you use a medium or large center speaker. The center speaker plays the center-channel bass sounds.

PHANTOM — Select this mode if you have no center speaker. All center-chan- nel sound is sent to the front left and right speakers.

3CHLOGIC— Select this mode if you do not have rear speakers. The rear channel’s sound is sent to the front left and right speakers.

Test Tone

This feature provides a test tone that lets you balance the signal levels between all your speakers. See “Center Level” and “Rear Level.”

To activate the test tone, select one of the surround sound modes and set AU- DIO/VIDEO on the remote control to AUDIO. Then press TEST TONE. The receiver sounds a 2-second tone from the front left, center, front right, and rear speakers, in sequence.

Notes:

The center test tone sounds only when you select the Dolby Pro Logic Surround (except PHANTOM) or 5-D Pro Logic sound mode.

In the Dolby 3CH Logic sound mode, the receiver sounds a 2-second tone from the left, center, and right speakers, in sequence.

Press TEST TONE again to turn off this feature.

Note: Use the VOLUME control to adjust the overall sound level.

Center/Rear Levels

Press CENTER LEVEL –/+to adjust the center speaker sound level.

Press REAR LEVEL –/+to adjust the rear speakers’ sound level.

Both CENTER LEVEL and REAR LEVEL work only for the sound system that sup- ports the center or rear speakers. For example, REAR LEVEL does not work for Dolby 3CH Logic.

22

Image 22
Contents Please read before using this equipment Audio/Video ReceiverIntroducing the Optimus STAV-3690 Important Safety Instructions Contents Preparing Your Receiver Positioning SpeakersSetting the Impedance Selector Switch Connecting SpeakersPreparing the Speaker Wires Preparing Your ReceiverConnecting the a and B Speakers Connecting the Center Speaker Connecting Surround-Sound SpeakersConnecting Center Channel and Subwoofer Amplifiers Connecting a CD Player Connecting Program SourcesConnecting a Turntable Connecting Cassette DecksConnecting Video Sources Connecting a Video MonitorAM Antennas Connecting the AntennasFM Antennas Inner Insulation Center Wire Outer Insulation Shielding Installing Remote Control’s Batteries Using One Remote Control for More than One UnitUsing the AC Power Outlet Connecting to AC PowerBasic Operation Loudness Control Using HeadphonesBasic Operation Muting the ReceiverManual Tuning Front Panel Only Tuning the RadioMemory Tuning Using FM Mono Cassette Deck/VCR Features Dubbing a Cassette TapePlaying a Video Tape Cassette Deck/VCR FeaturesCopying a Video Tape Dolby 3CH Logic Using Advanced Sound OptionsDolby Pro Logic Surround SFC EffectsTest Tone Using Advanced Sound OptionsCenter Mode Setting Center/Rear LevelsAUDIO/VIDEO Switch Using the Remote ControlReceiver/Amplifier Operation Tuner/TV Operation Using the Remote ControlCD Player Operation Resetting the Remote Control Tape/VCR OperationUsing the Remote Control Troubleshooting Returning Controls to Factory DefaultsCare and Maintenance FCC Wants You To Know Amplifier SpecificationsVideo Section AM Tuner SpecificationsFM Tuner GeneralIndex to Features by Control Name ControlPage Page Page RadioShack Division of Tandy Corporation Fort Worth, Texas