Optimus 31-3040, STAV-3690 owner manual Resetting the Remote Control, Tape/VCR Operation

Using the Remote Control

TRANSMIT/LEARN

LEARN RESET AUDIO VIDEO

RECEIVER		MASTER VOLUME
POWER	MUTING
	PRO	SFC	5-D
FUNCTION ROGIC		MODE	THEATER
TAPE 2		CENTER	TEST
MONITOR LOUD.		MODE	TONE
CENTER LEVEL		REAR LEVEL

TUNER/TV

Tape/VCR Operation

Before operation:

•Set AUDIO/VIDEO to AUDIO for a cassette deck or to VIDEO for a VCR.

•For a cassette deck, select TAPE 2 MONITOR or VCR/TAPE 1.

•For a dual cassette deck, select DECK 1 or DECK 2. If you use a single cas- sette deck, press DECK 2.

•You must connect the tape deck/VCR to both your receiver’s CONTROL OUT and audio jacks for these functions to work.

12

56

90/10

TV FM/AM POWER TV MODE

ASMS

CD

DISC

CD

POWER

BEST RANDOM

34

78

STATION

TV CHANNEL

CLASS FM MONO

– TV VOLUME +

DECK 1 DECK 2

– VCR CH +

ASMS

TAPE/VCR

POWER

TAPE/VCR

Tape/VCR Section

DECK 1/DECK 2	Selects Deck 1 or Deck 2 when you use a dual cassette deck
	with AUDIO/VIDEO set to AUDIO.
– VCR CH +	Moves to the next higher or lower channel with AUDIO/VIDEO
	set to VIDEO.
	Press to start playback. Press to play the other side of an
	auto-reverse cassette deck.
ASMS /	For a cassette deck, lets you quickly locate and play the
	beginning of recorded material during play.
	When the tape is stopped, lets you rapidly search forward or
	backward to locate a specific section of the tape.
	For a VCR, lets you rapidly view a tape either forward or

STAV-3890

AUDIO/VIDEO PROGRAMMABLE

SYSTEM REMOTE

	backward.
	Stops playback.
TAPE/VCR POWER	Turns on the connected VCR with AUDIO/VIDEO set to VIDEO;
	turns on the cassette deck with AUDIO/VIDEO set to AUDIO.
	Note: TAPE/VCR POWER does not work with all decks.

Resetting the Remote Control

If the remote control does not function due to strong static electricity, for exam- ple, insert a pointed object (such as a straightened paper clip or the tip of a pen) into the RESET hole on the top of the STAV-3690 remote control, then press and release it. This resets the remote control.

Training the Remote Control You can use your STAV-3690’s remote control instead of ones for other audio/ video components. To do this, you must first teach your STAV-3690’s remote

the other device’s remote control commands.

You can program the commands that appear on the remote control buttons. By changing the position of the AUDIO/VIDEO switch, you can program two com- mands to a single button.

Notes:

•You do not need to turn on the receiver or the other device.

•You might not be able to teach commands from some remotes.

25