Bay Technical Associates U140E116-02 owner manual Status, Serial Port Configuration

Enter Request :

.1 STATUS

By responding to the menu with a "1" (Status), you can review the current configuration of the V93A. Below is the default status.

Installed Modules :1,2
Port		Select Code		is					$BT
Attention Character is									;
Disconnect Time Guard is									Disabled
Local Modem Setup :
Rings to Auto-Answer									2
Modem Connectivity Time-out is									Disabled
Login Setup:
Login Password is				...................					BTA
Strike any Key to Continue
+	----	+	-----------	+-----	+-----		+----	+	------+-----	+---	+
Port			Device	Baud	Word		StopParityXon/Xoff
			Name	Rate	Size		Bits		XmitRecv
+	----	+	-----------	+-----	+-----		+----	+	------+-----	+---	+
	1	HostEIA-2329600				8	1		None Off Off
	2	Host MODEM		57.6k		8	1		None Off Off
+	----	+	-----------	+-----	+-----		+----	+	------+-----	+---	+

Strike any Key to Continue

.2 SERIAL PORT CONFIGURATION

By responding with "2" (Serial Port Configuration), you can change serial configuration for the EIA-232 port on the V93A. The V93A will then respond with:

Enter Host Device Number (1-2): 1

		Module 1 Serial Port Configuration :
+	----+	-----------	+-----	+-----	+----	+------	+-----	+---	+
Port		Device	Baud	Word	StopParityXon/Xoff
		Name	Rate	Size	Bits		XmitRecv
+	----+	-----------	+-----	+-----	+----	+------	+-----	+---	+
	1 Device A		9600	8	1 None Off Off
+	----+	-----------	+-----	+-----	+----	+------	+-----	+---	+

17