Device B | (2,2) | 2 |
Device C | (2,3) | 3 |
Device D | (2,4) | 4 |
Configure | C | |
Manual Mode | M | |
Exit | X | |
Unit Reset | R | |
Logout | T | |
Enter Request : |
|
|
The device names in the menu correspond to the device names assigned to the serial ports installed in the unit. To select a particular device simply enter the number of the device then hit return. Refer to section 16.4 of the M-
Series DAC owners manual for configuration of device names.
The other items in the menu provide various functions described below:
Configure - Allows users enter into the configuration mode for any installed modules or for the base unit. See Section 6 CONFIGURATION for details to configure the unit.
.3 MANUAL MODE
Manual Mode allows users to manually select a module and/or port. The “Manual Mode” selection for the V93A menu is used to make a module level connection which is used for sending commands to the module. The “Manual Mode” is used to make a connection to a module such as the Control Relay Module,
13