Optimus STAV-3560 Using the Remote Control, AUDIO∙SURROUND Switch, Receiver/Amplifier Section

Using the Remote Control

SURROUND

ASMS AUDIO

			CD
RANDOM BEST		DISC
DECK1	DECK2
	TAPE
STATION		CLASS	FM MONO
REAR		TAPE2
LEVEL		MONITOR FUNCTION
CENTER		SURR	MUTING
LEVEL		MODE
TEST	CENTER	DELAY
TONE	MODE	TIME
RETURN		S.BASS
RECEIVER	POWER		MASTER
	CD	TAPE	VOLUME

AUDIO/VIDEO

SYSTEM REMOTE OSR

Receive

Amplifie

Section

The remote control works up to a distance of about 23 feet, and within a 30- degree angle on either side of the receiver. Point the control at the receiver’s front panel and press the desired button(s).

Many buttons on the remote control work the same as buttons on the receiver’s front panel. Use these buttons exactly as you would use the corresponding but- tons on the receiver.

AUDIO∙SURROUND Switch

Set the switch to AUDIO to control audio components such as CD players or cassette decks. Set the switch to SURROUND when setting the surround sound options.

When you set the switch to SURROUND, dual-function buttons control the func- tion marked in gold next to the button. For example, the button marked TEST TONE and RETURN operates as the test tone function when you set the switch to SURROUND and returns the system to default settings when you set the switch

to AUDIO.

Receiver/Amplifier Section

FUNCTION	Selects a program source (VCR/Tape 1, LD/DVD, CD, tuner,
	or phono). Repeatedly press FUNCTION until the display
	shows your desired program source. See Page 14.

–MASTER VOLUME + Adjusts the system’s volume. See Page 14.

CENTER MODE	Selects among the three center modes or 3CH Logic. See
	Page 21.

–CENTER LEVEL + Controls the relative volume of the center speaker with AUDIO∙SURROUND set to AUDIO. See Page 21.

– REAR LEVEL +	Controls the relative volume of the rear speakers with
	AUDIO∙SURROUND set to SURROUND. See Page 21.
TEST TONE	Sounds test tones from each speaker with AUDIO∙SUR-
	ROUND set to SURROUND. See Page 21.
DELAY TIME	Sets the rear-channel delay for Dolby Pro-Logic Surround
	and Simulated Surround programs with AUDIO∙SURROUND
	set to SURROUND. See Page 21.
SURR MODE	Selects between Dolby Pro-Logic Surround or Simulated Sur-
	round sound. See Page 20.
RECEIVER POWER	Turns the receiver on and off. See Page 14.
RETURN	Returns the receiver to its default settings with AUDIO∙SUR-
	ROUND set to AUDIO. See Page 24.
TAPE 2 MONITOR	Switches the receiver to monitor the source connected to the
	TAPE 2 MONITOR jacks. See Page 18.
S. BASS	Press to enhance bass sound with AUDIO∙SURROUND set
	to AUDIO.
MUTING	Silences the receiver. Press again to restore the sound to its
	previous level. See Page 15.
STATION	Press to move the next higher or lower station in memory.
CLASS	Press to select the class of the station in memory
FM MONO	Press to disable the FM stereo mode to improve reception of
	weaker FM stations.

21