Using Aoss

AOSS (AirStation One-Touch Secure System) is a simple, one-touch setup for connecting wireless clients to an access point while setting up the most secure possible connection. Users no longer need to worry about choosing the proper security protocols, IP addresses, or SSID's. The intelligence of AOSS determines the most optimal connection and conﬁgures itself in seconds.

Using the Quick Setup Guide for your client device, please install the drivers and client manager software. Once complete, the following steps will guide you in using Buffalo's Client Manager software to initiate an AOSS connection.

It is recommended to shut off any personal ﬁrewalls on your PC (such as Zone Alarm, Microsoft Personal Firewall, Norton Internet Security, etc.). These programs may cause issues with the AOSS setup procedure. They may be re-enabled after the AOSS process has been completed.

■NOTE: AOSS automatically creates a secure connection to your AOSS Access Point. You must have a Buffalo AOSS enabled Access Point or Router to use AOSS on an AOSS enabled wireless client device.

◗Start Client Manager by right clicking on the Icon in your system "Tray", or by launching the Client Manager from you Start Menu. (Programs => Buffalo =>AirStation Utility => Client Manager 2)

◗From the Main Status Screen, Select the "Proﬁles" tab.

◗Click on the AOSS button to initiate your AOSS session. The AOSS wizard will begin and guide you through the automatic AOSS process.