Buffalo Technology WLI-CB-G108 setup guide Installing and Configuring the Wireless CardBus Adapter

Installing and Configuring the Wireless CardBus Adapter:

Step 1 Installing the Wireless CardBus Adapter Drivers

Caution: Complete Step 1 before inserting the Wireless CardBus Adapter.

◗ Insert the Air Navigator CD into the CD-ROM drive of the PC. The Air Navigator Setup Wizard launches automatically. If the Air Navigator Setup Wizard does not launch automatically, launch the wizard manually by selecting Start » Run to open the Run dialog box. Enter D:\Setup. exe in the Open field, where D:

represents the letter assigned to the CD-ROM drive. If another letter is assigned to the CD-ROM drive, your command should reflect that difference. Click the OK button to launch the wizard.

◗ Select Install Wireless Adapter. Click the OK button to begin the installation process.

◗ Click Next to continue the process.

◗ Review the Software License Agreement. Click the Yes button to confirm your agreement with the terms and continue installing the Wireless CardBus Adapter drivers. Click the No button to abort the installation process. Also, close the onscreen help that appears; it is not necessary for this setup.

2