Buffalo Technology WHR3-G54 user manual Advanced Settings

Page 27

Advanced Settings

If there are multiple APs in close proximity using the same channel, there may be interference. In this case, change to a non-overlapping channel.

Privacy Separator - Enable or disable communication between wireless clients. If you choose to use this feature, every wireless client that is associated to the AirStation will not be able to communicate with any other wireless clients.

Note: If this function is used, wired clients can still communicate with wireless clients.

BSS (Basic Service Set) Basic Rate Set - The transmission data rates offered by the AirStation. It is recommended to use the ‘Default’ selection to accomidate 802.11 and 802.11b rate sets. It is NOT recom- mended to use the ‘All’ selection, as some devices may not understand all of the rate sets offered by the AirStation.

Frame Bursting - This function increases 802.11g communication throughput by transferring packets more efficiently. The following conditions affect this function:

The wireless LAN client adapter must support Frame Bursting (and it must be enabled). If the wireless LAN client adapter does not support Frame Bursting, or Frame Bursting is not enabled, then it will operate at non-Frame Bursting speeds.

125 High Speed Mode - This function further increases 802.11g communication. Rate sets up to 125 Mbps are offered to clients.The following conditions affect this function:

The wireless LAN client adapter must support 125 High Speed Mode (and it must be enabled). If the wireless LAN client adapter does not support 125 High Speed Mode, or it is not enabled, then it will operate at regular 802.11g speeds.

It is recommended to leave 125 High Speed Mode enabled as it can only help throughput, not hurt it.

27

Image 27 Buffalo Technology WHR3-G54 user manual Advanced Settings
Contents High Speed Mode Wireless Cable/DSL Router WHR3-G54 Table of Contents Network Settings Table of Contents Introduction Introduction SOHO/SMB Networking Home NetworkingSystem Requirements AirStation WHR3-G54 Package ContentsProduct Views About the AirStation CD Installation / Setup Setup Preparation Setup OverviewIntroduction Antenna Installation Open the Setup Screen Standard SettingsEnter ISP information DSL ButtonAutomatic IP Assignment by ISP PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for information about Messenger Aoss Aoss Additional Aoss Information Wireless Function Enable or Advanced SettingsLAN Settings Wireless SettingsAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Settings Wired WAN PerformanceWAN Port Connection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Advanced Settings Routing Setup Network SettingsAdd Routing Table Entry Enable or Disable . Address Address TranslationIP Masquerade When Display/Delete NAT Table Add NAT Table Advanced Settings Log Output Select Output to Packet FilterBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete DETECTOR@AIRSTATION Intrusion DetectorPage UPnP Management System Information Admin Name Password Time setup Select Use or Do not useNTP server name Enter Packet Traffic Information Wired WAN Wired LAN Wireless LANIP Address and Medium Client MonitorPing Test Log Information Display log info SelectLog information Displays Syslog Transfer Log Information LevelLog Information Select Save/Restore Settings Save current settings ClickRestored saved settings Reboot/Reload Defaults Click Restart to rebootAirStation Firmware Update Com/wirelessFirmware file name Client Table Displays AossManually specify the encryp Aoss Function Click EnableAdditional Information Temperature & HumidityPower Characteristics SpecificationsHost Operating System Networking CharacteristicsRadio Characteristics Regulatory InformationOpen Office Environment Semi-Open Office Environment 2412 Diag LED Activity TroubleshootingCommon Problems LED Activity BChanging Client TCP/IP Settings in Windows Table B.1.1 Diag LED Activity TableLEDs Work But Client PC Cannot Connect to Network Other Problems Problem CauseRestrictions Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NotePotential restrictive use FCC RF Radiation Exposure StatementEU Countries intended for use EU Countries Not intended for useWarranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax

WHR3-G54 specifications

Buffalo Technology WHR3-G54 is a versatile wireless router designed to deliver reliable connectivity and efficient network performance. Targeted at home users and small offices, the WHR3-G54 combines ease of use with advanced features suitable for everyday internet activities.

One of the standout characteristics of the WHR3-G54 is its compliance with the IEEE 802.11g wireless standard, which allows for wireless connectivity at speeds of up to 54 Mbps. This makes it suitable for activities such as browsing the internet, streaming media, and online gaming. Additionally, the router is backward compatible with older wireless standards like 802.11b, ensuring users with legacy devices can still connect without issues.

The WHR3-G54 features a built-in four-port Ethernet switch, allowing for wired connections to devices such as gaming consoles, PCs, and network printers. This provides flexibility for users who prefer wired connections for reliability and speed. The presence of multiple Ethernet ports eliminates the need for a separate switch, making the device an all-in-one networking solution.

Security is a pivotal aspect of the WHR3-G54. It supports a variety of security protocols including WEP, WPA, and WPA2, ensuring that users can choose the appropriate level of protection for their network. This is particularly important in a time when cybersecurity threats are prevalent, and maintaining a secure network is essential for both personal and sensitive data protection.

Buffalo Technology has also incorporated their AirStation One-Touch Secure System (AOSS) for easy wireless setup. AOSS simplifies the process of connecting devices to the wireless network with just a push of a button, making it user-friendly, even for those who may not be tech-savvy.

The WHR3-G54 also features a built-in firewall and Network Address Translation (NAT), enhancing overall network security by preventing unauthorized access from external sources. This makes it suitable for homes with multiple connected devices, as it can manage traffic efficiently while keeping the network safe.

Overall, Buffalo Technology WHR3-G54 stands out as a reliable and efficient networking device offering a balanced combination of speed, security, and ease of use, catering to the needs of users seeking robust wireless performance in various home or small office settings.