Buffalo Technology WHR3-G54 user manual Firmware Update, Firmware file name, Com/wireless

Page 68

Advanced Settings

Firmware

Firmware Update

Update

Firmware file name

 

 

- Click Browse to browse

 

to the path and fi lename

 

for the new fi rmware. Click

 

Firmware Update to load

 

fi rmware to the AirStation.

 

■ Note: Firmware update

 

does not erase current

 

user settings.

 

Please visit the Buffalo

 

Technology Web Page to

 

download the latest fi rm-

 

wares free of charge.

 

http://www.buffalotech.

 

com/wireless

68

Page 67 Page 69
Image 68
Page 67 Page 69
Contents High Speed Mode Wireless Cable/DSL Router WHR3-G54 Table of Contents Network Settings Table of Contents Introduction Introduction Home Networking SOHO/SMB NetworkingAirStation WHR3-G54 Package Contents System RequirementsProduct Views About the AirStation CD Installation / Setup Introduction Setup PreparationSetup Overview Antenna Installation Standard Settings Open the Setup ScreenAutomatic IP Assignment by ISP Enter ISP informationDSL Button Enter IP Address Manually PPPoE ConnectionCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for information about Messenger Aoss Aoss Additional Aoss Information Advanced Settings LAN SettingsWireless Settings Wireless Function Enable orAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless MAC Filter Wireless PC’s ConnectionRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Port WAN SettingsWired WAN Performance Connection Type Select from MTU Maximum Transmit MRU Maximum ReceiveWAN Network Advanced Settings Network Settings Routing SetupAdd Routing Table Entry IP Masquerade When Enable or Disable . AddressAddress Translation Display/Delete NAT Table Add NAT Table Advanced Settings Packet Filter Log Output Select Output toBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete Intrusion Detector DETECTOR@AIRSTATIONPage UPnP Management System Information Admin Name Password NTP server name Enter Time setupSelect Use or Do not use Wired WAN Wired LAN Wireless LAN Packet Traffic InformationClient Monitor IP Address and MediumPing Test Log information Displays Log InformationDisplay log info Select Log Information Select Syslog Transfer Log Information Level Restored saved settings Save/Restore SettingsSave current settings Click AirStation Reboot/Reload DefaultsClick Restart to reboot Firmware file name Firmware UpdateCom/wireless Aoss Client Table DisplaysAoss Function Click Enable Manually specify the encrypTemperature & Humidity Power CharacteristicsSpecifications Additional InformationNetworking Characteristics Radio CharacteristicsRegulatory Information Host Operating SystemOpen Office Environment Semi-Open Office Environment 2412 Troubleshooting Common ProblemsLED Activity B Diag LED ActivityLEDs Work But Client PC Cannot Connect to Network Changing Client TCP/IP Settings in WindowsTable B.1.1 Diag LED Activity Table Other Problems Restrictions ProblemCause Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second PCI Peripheral Component Interconnect a ROM Read Only Memory Permanent memoryGlossary Glossary FCC / CE Information Federal Communication Commission Interference StatementImportant Note Federal Communication Commission Interference StatementFCC RF Radiation Exposure Statement EU Countries intended for useEU Countries Not intended for use Potential restrictive useWarranty Information Contact Information General Inquiries4030 W. Braker Ln. Suite Austin, Texas Tel Fax
Top Page Image Contents