Buffalo Technology WLI-TX4-G54HP setup guide System Requirements, Getting Started

Page 2

Basic Setup

System Requirements

Desktop or Notebook computer with an RJ-45 Ethernet port (for configuration)

Web Browser (Firefox 1.0 or later, Mozilla 5.0 or later, or IE 5.0 or later)

802.11b or 802.11g access point (Infrastructure Mode) OR a different computer with an 802.11b or 802.11g wireless adapter (Ad-hoc Mode).

Getting Started

Screw the antenna into the top or side of your Wireless Ethernet Converter as shown. You may also attach the optional stand if you wish. For best performance, orient the antenna to point straight up. If you want to substitute a different 2.4GHz antenna, make sure that it has the correct RP-SMA connector.

Plug the AC adapter into an AC power source and plug the connector into the back of the Ethernet Converter. It will take about 30 seconds to boot up.



Image 2
Contents Quick Setup Guide Package ContentsSystem Requirements Getting StartedAoss Installation Aoss buttonManual Configuration Ethernet Converter ManagerConfiguration with Ethernet Converter Manager Page Configuration without Software Web Based Configuration Page Page Technical Support Warranty
Related manuals
Manual 30 pages 58.96 Kb