LAN Config (LAN Port)
Default for the LAN side IP address is 192.168.11.1. To add the AirStation to an existing LAN, specify a unique IPaddress, not used elsewhere in the network.
The default Subnet Mask is 255.255.255.0. To connect AirStation to an existing LAN, specify the Subnet Mask that the LAN uses.
If there’s more than one DHCP server on a network, disable all but one of them. To have DHCP assign addresses from a specific range, enter a begining address by Assigned IP Address and give the number
of addresses to assign in the Addresses box. To exclude specific addresses from being assigned by DHCP, specify them in the Excluded IP Address box. Multiple IP addresses may be specified by seperating them with a comma, e.g. 192.168.11.7,192.168.11.9. You can also specify an IP address range by start and end address connected by a dash, e.g.
Click the Help link in the top right corner for more information.
28