Buffalo Technology WZR-RS-G54 user manual MAC Filter Click Enter MAC Lter to enter MAC address

Page 57

Advanced Settings

no longer have access to the AirStation conﬁ guration screens. This function prohibits setup from a wireless or wired computer. The AirStation can be returned to the factory default settings by holding down the INIT button on the back of the unit for ﬁ ve seconds or until the red DIAG light becomes solid.

Protocol - Mark and select a speciﬁ c protocol. Select from all protocols, ICMP, arbitrary protocol number and TCP/UDP protocol number.

•All - Selects all IP protocols.

•ICMP - Network Diagnostic Protocol (1).

•Manual - Enter protocol number (0-65535).

•TCP/UDP Destination Port - Select TCP or UDP, then enter port number.

Priority - Specify the priority an item. The smaller the number, the higher the priority.

Add MAC Filter setting

MAC Filter - Click Enter MAC

ﬁ lter to enter MAC address.

Source MAC address -The MAC address of the source of the packets that will be ﬁ ltered may be set. Click Add rule when complete.

57

Image 57

Contents WZR-RS-G54 Table of Contents Network Settings Table of Contents Introduction Introduction SOHO/SMB Networking Home NetworkingSystem Requirements AirStation WZR-RS-G54 Package ContentsProduct Views About the AirStation CD Installation / Setup Setup Preparation Setup OverviewIntroduction Antenna Installation Open the Setup Screen Standard SettingsEnter ISP information DSL ButtonAutomatic IP Assignment by ISP PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for information about Messenger Aoss Aoss Additional Aoss Information LAN Settings Advanced SettingsWireless Settings Wireless Function Enable orAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings Wired WAN Performance WAN SettingsWAN Port WAN IP Address Allows adConnection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Pptp Client Advanced Settings Pptp Server Dynamic DNS Advanced SettingsPage Routing Setup Network SettingsDestination address Net- work IP address and subnet mask Enable or Disable . Address Address TranslationIP Masquerade When Display/Delete NAT Table Add NAT Table Advanced Settings Log Output Select Output to Packet FilterBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete DETECTOR@AIRSTATION Intrusion DetectorPage UPnP Management System Information Change Password NTP server name Enter the NTP server name Time setupPacket Trafﬁc Information Wired WAN Wired LAN Wireless LANIP Address and Medium Client MonitorPing Test Log Information Display log info SelectLog information Displays Select Use or Do not use Syslog TransferLog Information Level Log Information SelectSave/Restore Settings Save current settings ClickRestored saved settings Reboot/Reload Defaults Click Restart to rebootAirStation Firmware ﬁle name Firmware UpdateClient Table Displays AossManually specify the encryp Aoss Function Click EnableNetwork Service List Network Service List File & Printer Sharing Audio/Video Playback Remote Control TightVNC Remote Control TightVNC Remote Control TightVNC Power Characteristics Temperature & HumiditySpeciﬁcations Additional InformationRadio Characteristics Networking CharacteristicsRegulatory Information Host Operating SystemOpen Ofﬁce Environment Semi-Open Ofﬁce Environment 2412 Common Problems TroubleshootingLED Activity B Diag LED ActivityChanging Client TCP/IP Settings in Windows Table B.1.1 Diag LED Activity TableLEDs Work But Client PC Cannot Connect to Network Other Problems Problem CauseRestrictions Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NoteFCC RF Radiation Exposure Statement SafetyIntended use Important NoticeEU Countries intended for use EU countries not intended for usePotential restrictive use Warranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax