Easy, Proven, Deployed

•••Ethernet Access Devices (EADs) Product Category

World’s most proven line of EADs

4 or 8 SHDSL.bis 5.7 Mbps WAN ports and 4 Ethernet LAN ports

1 or 2 SHDSL.bis 5.7 Mbps WAN ports and up to 2 Ethernet LAN ports

EtherXtend

EtherXtend LT

EtherXtend is a high capacity EAD capable of bonding up to

8 SHDSL.bis copper lines for up to 45.6 Mbps of bandwidth. EtherXtend supports both 802.3ah EFM interface and OAM standards, as well as existing HDLC-based Ethernet over copper bonding. It is an intelligent Demarc device, being fully managed with bridging or Layer 3 routing options supported.

EtherXtend LT is a value featured EAD that offers the advantages of 5.7 Mbps SHDSL.bis in 1 or 2 port WANS and up to 1 or 2 Ethernet LAN ports. EtherXtend LT uses proven HDLC-based encoding for Ethernet loop bonding, supported on both MALC and IPD product lines. Features configuration-free, plug-and-play operation.

1 or 2 DS3 WAN ports and	T1 / E1 / SHDSL Network Extenders
4 Ethernet LAN ports	with proven performance

EtherXtend LT-DS3

TNE / ENE / SNE

EtherXtend LT DS3 is a value featured EAD supporting up to

90 Mbps with bonded DS3. It supports SNMP, CLI or web-based management and Layer 2 bridging. It supports 802.1Q and 802.1p, along with DHCP.

EtherXtend LT uses proven HDLC-based encoding for Ethernet loop bonding, supported on both MALC and IPD product lines.

Zhone’s line of Network Extenders have been serving carrier’s needs for years, delivering highly reliable and proven Ethernet over copper services and loop bonding. A large selection of models offers a selection of WAN and LAN options to suit a particular service need. They can be used bookended or integrated with MALC or IPD Ethernet aggregation compatible line cards. All Network Extenders use time tested HDLC-based Ethernet loop bonding.