Zhone Technologies Copper-Based Ethernet manual EFM Aggregation, Malc-Efm, IPD Dslam

Page 6

•••EFM Aggregation

Versatile multi-service access and aggregation over copper and fiber

MALC-EFM

319, 719, 723

The MALC is a full featured Layer 2 and 3 multi-service access platform. Using a common chassis, uplink and commons, MALC-EFM serves as an Ethernet aggregation access platform supporting SHDSL.bis (5.7 Mbps) or T1 / E1 bonding from

24-port line cards. Network timing and networking powering line card options are also available. MALC-EFM is backwards compatible with HDLC based Ethernet Access Devices (EADs), as well as compliant with 802.3ah EFM standards EADs. EFM services can also be mixed with any other services and line cards. The MALC supports multi-service applications, including POTS, ADSL2+, VDSL2, Active Ethernet, and GPON. The MALC offers maximum flexibility coupled with economic scalability for a carrier’s service needs.

Core DSLAM functionality with 802.3ah EFM support

8800 DSLAM

8820 / 8620

Recognized as a workhorse in carrier networks for years, the 8820 / 8620 DSLAM family serves as a proven and reliable DSLAM for broadband Internet data services including Ethernet over copper. As an advanced DSLAM, 8820 and 8620 supports both ATM and IP services with QoS support for both.

nLayer 2 switching

nAdvanced MTM (Multimedia Traffic Management) features

nBoth ATM and IP uplinks

nSupports 802.3ah EFM SHDSL.bis loop bonding aggregation

MALC-EFM-SHDSL

MALC-EFM-T1 / E1-24

n802.1 Q in Q transparent LAN support

nBridge / Router interface support on all ports

n802.3ah (EFM) compliance

n802.3ah OAM

nOriginal HDLC loop bonding support

nIP SLA latency / jitter / data -loss measurements

nRate limiting by service

nMTM – rate limiting by service

nSLA support via ICMP

nCard options for network timing and network powering

IP DSLAM delivering advanced broadband services

IPD DSLAM

4000 / 12000

IPD is a proven, carrier-class IP access system providing a high- capacity platform for Ethernet multi-service aggregation. Using a 48-port SHDSL line card or 24-port T1 or E1 Ethernet line cards, IPD delivers highly reliable Ethernet-over-copper with over 6 years of field-proven experience worldwide. IPD can also support ADSL, ADSL2+, SHDSL services as a complete IP services platform along with Ethernet over copper.

nWorld’s most widely used Ethernet over copper aggregation platform

nField-proven performance and reliability

nLayer 2 switching, layer 3 aware

nVLAN support

nSupports extended-rate SHDSL.bis with a 48-port line card

Image 6
Contents EFM Product Guide Copper-Based Ethernet in the First MileNeed high-bandwidth Ethernet service over existing copper? Ethernet EverywhereBonding copper circuits for increased Ethernet bandwidth EtherXtend EtherXtend LT Ethernet Access Devices EADs Product CategoryEasy, Proven, Deployed EtherXtend LT-DS3Ethernet Access Device Selection Guide Product CategoryDslam EFM AggregationMALC-EFM IPD DslamAggregation Platforms EAD to Aggregation Platform InteroperabilityAccess for a Converging World North America