Zhone Technologies 6212-I2 manual Windows ME

Page 23

Configuring Your Computer

8After restarting your PC, double-click on the Network and Dial-up Connections icon in the Control Panel.

9In Network and Dial-up Connections window, right-click on the Local Area Connection icon, and then select Properties.

10In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click on Properties.

11In the Internet Protocol (TCP/IP) Properties dialog box, click on the radio button labeled Use the following IP address. Type an address between 192.168.1.3 and 192.168.1.254 in the IP Address field and 255.255.255.0 in the Subnet Mask field.

12Click on OK twice to confirm and save your changes, and then close the Control Panel.

Windows ME

1In the Windows task bar, click on the Start button, point to Settings, and then click on Control Panel.

2Double-click on the Network and Dial-up Connections icon.

3In the Network and Dial-up Connections window, right-click on the Network icon, and then select Properties.

The Network Properties dialog box displays a list of currently installed network components. If the list includes Internet Protocol (TCP/IP), the protocol has already been enabled; skip to Step 11.

4If Internet Protocol (TCP/IP) does not appear as an installed component, click on Add.

5In the Select Network Component Type dialog box, select Protocol, and then click on Add.

6Select Microsoft in the Manufacturers box.

7Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click on OK.

You may be prompted to install files from your Windows Me installation CD or other media. Follow the instructions to install the files.

8If prompted, click on OK to restart your computer with the new settings.

9After restarting your PC, double-click on the Network and Dial-up Connections icon in the Control Panel.

10In Network and Dial-up Connections window, right-click on the Network icon, and then select Properties.

11In the Network Properties dialog box, select TCP/IP, and then click on Properties.

12In the TCP/IP Settings dialog box, click on the radio button labeled Use the following IP address. Type an address between 192.168.1.3 and

6212-A2-ZB23-10

6212-I2 4-Port Router User’s Guide

23

Image 23

Contents 6212-I2 4-Port Router User’s Guide Zhone Technologies @Zhone Way Important Safety Instructions CE Marking FCC Part 15 Declaration 6212-I2 4-Port Router User’s Guide Canada EMI Notice Contents Add Function ATM PVC Configuration Snmp 6212-I2 4-Port Router User’s Guide Document Summary About this Guide6212-I2 4-Port Router User’s Guide System Requirements FeaturesIntroduction Front Panel Parts ListLine Rear PanelIntroduction Overview Hardware Installation and PC SetupConnecting the Hardware Light is not on, check if the power adapter is attached to Windows Run Dialog Configuring Your Computer Windows Version Windows XPNetwork Connections Windows XP TCP/IP Properties Windows XP WindowsWindows ME Windows NT Windows 95 and WindowsLogging in to Your Router Default User Names and Passwords Capability Web Interface Home Hardware Installation and PC Setup Status Summary Device InformationWAN Statistics LAN StatisticsAdsl Statistics ATM StatisticsAdsl Status Adsl BER TestAdsl BER Test Start RouteARP Quick Setup with Auto-Connect Enabled Quick SetupDetecting Available PVC Quick Setup with Auto-Connect DisabledClick on Next. The Connection Type screen appears PPP Username and Password Device Setup WAN Setup Summary Add Function ATM PVC Configuration Advanced SetupATM PVC Configuration Screen Connection Type Screen Connection Type ScreenRemove Function WAN Setup SummaryVirtual Servers Local Area Network LAN SetupFinish Function NAT Virtual Server Setup Removing Selected Virtual Servers Port TriggeringPort Triggering Add DMZ HostIP Filtering Outgoing FirewallIP Filtering Outgoing Filter Add IP Filtering IncomingIP Filtering Incoming Filter Setup IP Filtering Incoming Filtering List Firewall MAC FilteringIP Filtering MAC Filtering Add Parental ControlParental Control Screen Port Mapping Port MappingQuality of Service Setup Quality of ServiceQuality of Service Add Screen Routing Default GatewayRouting Static Route Static Route SetupDNS Server Routing RIPDynamic DNS DNS SetupAdsl Capability DSL Advanced SettingsModulation Methods Phone Line PairTone Selection DSL Advanced SettingsTone Settings Testing the DSL Connection DiagnosticsDiagnostics Management Saving and Restoring the ConfigurationBacking Up Configuration Settings Select the location where you want to save the file Restore User Settings Screen Restoring Configuration SettingsUpload in Progress Screen Restoring Default SettingsSystem Log Restore Default Confirmation DialogView System Log Configure System LogSnmp Internet Time Screen Internet TimeAccess Control IP Addresses Access Control ServicesAccess Control IP Address Add Screen Access Control PasswordsReboot Router Update SoftwareManagement Specifications Specifications ATM IndexSntp 6212-A2-ZB23-10 6212-I2 4-Port Router User’s Guide 6212-I2 4-Port Router User’s Guide