Zhone Technologies 6212-I2 manual Light is not on, check if the power adapter is attached to

Page 18

Hardware Installation and PC Setup

LINE

RESET

CONSOLE DEFAULT LAN 1 LAN 2 LAN 3 LAN 4

Power

POWERSwitch

05-17712

Figure 3: Hardware Installation

5Turn on your PC and any other LAN devices, such as hubs or switches.

6Turn on the router using its power switch.

7Verify that the router's LEDs are illuminated as shown in Table 3.

Table 3: LED Indicators (Sheet 1 of 2)

This LED . . .	Should be:

POWER	Solid green to indicate that the device is turned on. If this
	light is not on, check if the power adapter is attached to the
	router and plugged into an AC power source.

xDSL ACT	Solid green to indicate that the router can communicate
	with your ISP via ADSL, flashing when the device is
	sending or receiving data over the ADSL connection, or
	blinking when the router is trying to connect to your ISP.

xDSL LNK	Flashing when the device is sending or receiving data over
	the ADSL connection.

18

6212-I2 4-Port Router User’s Guide

6212-A2-ZB23-10

Image 18

Contents 6212-I2 4-Port Router User’s Guide Zhone Technologies @Zhone Way Important Safety Instructions CE Marking FCC Part 15 Declaration 6212-I2 4-Port Router User’s Guide Canada EMI Notice Contents Add Function ATM PVC Configuration Snmp 6212-I2 4-Port Router User’s Guide About this Guide Document Summary6212-I2 4-Port Router User’s Guide Features IntroductionSystem Requirements Parts List Front PanelRear Panel LineIntroduction Hardware Installation and PC Setup Connecting the HardwareOverview Light is not on, check if the power adapter is attached to Configuring Your Computer Windows Run DialogWindows XP Windows VersionNetwork Connections Windows XP Windows TCP/IP Properties Windows XPWindows ME Windows 95 and Windows Windows NTLogging in to Your Router Default User Names and Passwords Capability Web Interface Home Hardware Installation and PC Setup Device Information Status SummaryLAN Statistics WAN StatisticsATM Statistics Adsl StatisticsAdsl BER Test Adsl StatusRoute Adsl BER Test StartARP Quick Setup Quick Setup with Auto-Connect EnabledQuick Setup with Auto-Connect Disabled Detecting Available PVCClick on Next. The Connection Type screen appears PPP Username and Password Device Setup WAN Setup Summary Advanced Setup Add Function ATM PVC ConfigurationATM PVC Configuration Screen Connection Type Screen Connection Type ScreenWAN Setup Summary Remove FunctionLocal Area Network LAN Setup Finish FunctionVirtual Servers NAT Virtual Server Setup Port Triggering Removing Selected Virtual ServersDMZ Host Port Triggering AddFirewall IP Filtering OutgoingIP Filtering Incoming IP Filtering Outgoing Filter AddIP Filtering Incoming Filter Setup Firewall MAC Filtering IP Filtering Incoming Filtering ListParental Control IP Filtering MAC Filtering AddParental Control Screen Port Mapping Port MappingQuality of Service Quality of Service SetupRouting Default Gateway Quality of Service Add ScreenStatic Route Setup Routing Static RouteRouting RIP DNS ServerDNS Setup Dynamic DNSAdsl Phone Line Pair DSL Advanced SettingsModulation Methods CapabilityDSL Advanced Settings Tone SelectionTone Settings Diagnostics Testing the DSL ConnectionDiagnostics Saving and Restoring the Configuration Backing Up Configuration SettingsManagement Select the location where you want to save the file Restoring Configuration Settings Restore User Settings ScreenRestoring Default Settings Upload in Progress ScreenRestore Default Confirmation Dialog System LogConfigure System Log View System LogSnmp Internet Time Internet Time ScreenAccess Control Services Access Control IP AddressesAccess Control Passwords Access Control IP Address Add ScreenUpdate Software Reboot RouterManagement Specifications Specifications Index ATMSntp 6212-A2-ZB23-10 6212-I2 4-Port Router User’s Guide 6212-I2 4-Port Router User’s Guide