Installation Options
Installation in a Rack
Using a Phillips Screwdriver, attach the two provided rack mount brackets to the sides of the 4000E with eight of the ten provided bracket screws. There are seven position options for the rack brackets; position them as best suited to the space available for your chassis on the rack being utilized.
4000E Side View
Rear
Front
Rack Mount
Bracket
Mount the chassis onto the rack and secure the rack mount brackets to the sides of the rack using one of the two provided sets of eight [8] rack screws (whichever size fits the rack being utilized).
MULTIPLEXER UPLINK MODULE FAN PWR | Lnk Act Dplx |
MUM
U1 4
IP DSL Access Multiplexer 4000E
T1 INVERSE MULTIPLEXER | PWR | RX TX AL LK 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 | TIM |
4000E Front View
3 | A |
| C |
| C |
| E |
| S |
2 | S |
1 |
|
Check the rack for stability, ensuring that installation of the 4000E has not caused the rack to become
4000E IP Broadband Loop Carrier Installation Instructions | 7 |