Avocent DSR1161, DSR4160, DSR800 To connect and power up your DSR, To install your DS software

Page 20

14DSR Installer/User Guide

To connect and power up your DSR:

1.Connect your network cable from the LAN port on the rear of the DSR to your network.

2.Then power up all attached systems.

NOTE : Your software registration key will be necessary for all installations. Internet Explorer 5.0 or higher must be installed on all systems running DSR software.

To install your DS software:

See the DS Installer/User Guide that ships with your software.

Image 20 Avocent DSR1161, DSR4160, DSR800, DSR2161 manual To connect and power up your DSR, To install your DS software
Contents DSR Power on DSR USA Notification Canadian Notification Table of Contents Page Product Overview Page Features and Benefits Access the DSR via network connectionDSView provides simple point and click access to any server Reduce cable bulkTCP/IP Safety Precautions DSR Model ComparisonRack mount safety considerations Installation Page Getting Started Supplied with the DSRAdditional items needed Verification of Ethernet/computer connectionsSetting up your network DSR in a Network ConfigurationInstalling the DSR Unit Basic DSR ConfigurationTo install the DSR hardware To configure the DSR hardwareTo adjust the mouse acceleration To connect a Dsriq module to each serverTo connect and power up your DSR To install your DS softwareLocal Port Operation Page To access the Main dialog box Oscar Status SymbolsControlling your System at the Local Port Viewing and Selecting Ports and ServersSoft switching Selecting serversOscar navigation basics Oscar GUIConfiguring Oscar To access the Setup menuSetup Features to Manage Routine Tasks for your Servers Changing the display behaviorTo set the Switch Mode To access the Menu dialog boxTo set a delay time for Oscar GUI To access the Flag dialog box Controlling the status flagOscar Status Flags To determine how the status flag is displayedTo set or change the password Setting console securityTo access the Security dialog box To password protect your console To remove password protection from your consoleTo enable the screen saver mode with no password protection To log in to your consoleTo exit the screen saver mode To access the Names dialog boxAssigning server names To turn off the screen saverResetting your Keyboard and Mouse To reset the mouse and keyboard valuesTo assign names to servers To list servers alphabetically by nameDisplaying Version Information To display version informationDSR Installer/User Guide Terminal Operations Page Accessing the Terminal Menu Terminal applications menu commandsNetwork Configuration menu Security Configuration menuEnable Debug Messages menu Set/Change Password menuFirmware Management menu To activate securityTo change the password Exit menuDSR Installer/User Guide Appendices Page Appendix a Flash Upgrades To upload a new Flash fileAppendix B Technical Specifications Server PortsAppendix C Technical Support DSR Installer/User Guide Limited Warranty For Technical Support