Bryant 583A manual Guide Specifications

Page 26

GUIDE SPECIFICATIONS (cont)

L. Motors:

8. Low Ambient Package:

1.Compressor motors shall be of the refrigerant-cooled type with line-break thermal and current overload protection.

2.All fan motors shall have permanently lubricated bear- ings, and inherent, automatic reset, thermal overload protection.

3.Condenser-fan motor shall be totally enclosed. M. Special Features:

1.Louvered Grille:

Wire grille shall be standard on all units. Louvered grille shall be available as a factory-installed option to provide hail guard and vandalism protection.

2.Coil Options:

Shall include factory-installed optional copper/copper and vinyl-coated refrigerant coils.

3.Economizer:

a.Economizer controls capable of providing free cooling using outside air.

b.Equipped with low leakage dampers not to exceed 3% leakage, at 1.0 in. wg pressure differential.

c.Spring return motor shuts off outdoor damper on power failure.

4.Flat Roof Curb:

Curbs shall have seal strip and a wood nailer for ¯ash- ing and shall be installed per manufacturer's instructions.

5.Manual Outdoor Air Damper:

Package shall consist of damper, birdscreen, and rain- hood which can be preset to admit outdoor air for year-round ventilation.

6.Thermostat:

To provide for one-stage heating and cooling in addi- tion manual or automatic changeover and indoor fan control.

7.Natural-to-Propane Conversion Kit:

Shall consist of a solid-state control and condenser coil temperature sensor for controlling condenser-fan motor operation, which shall allow unit to operate down to 0° F outdoor ambient temperature.

9.Filter Rack Kit:

Shall provide ®lter mounting for down¯ow applications.

10.Controls Upgrade Kit:

Shall provide high and low pressure safety protection.

11.Square-To-Round Duct Transitions:

Shall have the ability to convert the supply and return openings from rectangular to round.

12.Compressor Protection:

Solid-state control shall protect compressor by pre- venting ``short cycling.''

13.Duct Conversion Kit:

Shall enable conversion of a factory supplied side discharge unit to down¯ow discharge air¯ow unit.

14.Crankcase Heater:

Shall provide anti-¯oodback protection for low-load cooling applications.

15.High Altitude Kit:

Shall consist of natural gas ori®ces to compensate for gas heat operation at 2001 to 6000 ft above sea level.

16.Low NOx Kit:

Shall provide NOx reduction to values below 40 nanograms/joule to meet California emission requirements.

17.Compressor Hard Start Kit:

Shall provide additional starting torque for single- phase compressors.

Shall be complete with all required hardware to con- vert to liquid propane (LP) operation at 3.5 in. wg manifold pressure.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents DURABLE, Dependable Components FEATURE/BENEFITSUnit 583A Efficient OperationTable of Contents Model Number Nomenclature ARI* Capacities Cooling Capacities and EfficienciesRange F Unit Heating Input Output Capacity Temperature RiseHeating Capacities and Efficiencies Physical Data Unit Size 583AFIELD-INSTALLED Accessories Options and AccessoriesFACTORY-INSTALLED Options Options and Accessories Economizer Base Unit Dimensions Ð Unit Sizes Characteristics``A 042060/090 Curb Accessory DimensionsUnit Part Number II Select Unit Based on Required Cooling Capacity Selection Procedure with ExampleSelect Unit That Corresponds to Power Source Available Performance Data NET Cooling Capacities SHCPerformance Data NET Cooling Capacities 583A--048 Performance Data Unit Size Airflow Pressure Drop 583A WET Coil Pressure DropOutdoor Sound ONE-THIRD Octave Band Data Ð Decibels Unit 583A Pressure DropInput Output Orifice High Altitude CompensationNatural GAS only NUMBER²Typical Piping and Wiring Application Data Electrical Data Typical Wiring Schematic Ð 208/230-1-60 Shown OFMTypical Wiring Schematic Ð 208/230-3-60 Shown IGCTypical Wiring Schematic Ð 460-3-60 Shown Controls Operating SequencePart 2 Ð Products Guide SpecificationsPart 1 Ð General Guide Specifications Page Copyright 1999 Bryant Heating & Cooling Systems
Related manuals
Manual 8 pages 4.13 Kb

583A specifications

The Bryant 583A is a cutting-edge gas furnace designed for both efficiency and comfort, making it an ideal heating solution for residential applications. This model is particularly known for its exceptional performance and innovative technology, resulting in lower energy bills and a more consistent indoor environment.

One of the standout features of the Bryant 583A is its high-efficiency operation, boasting an AFUE (Annual Fuel Utilization Efficiency) rating of up to 95%. This means that a significant portion of the fuel consumed is converted into usable heat, making it an environmentally friendly choice that reduces energy waste. The design employs a two-stage heating operation, which allows the furnace to adjust its output according to the heating demands of the home, providing balanced warmth while minimizing energy consumption.

Built with advanced technology, the Bryant 583A includes a variable-speed blower motor that enhances comfort by distributing heated air more evenly throughout the home. This feature not only improves air circulation but also promotes quieter operation compared to standard single-speed blowers. The intelligent control system of the furnace permits compatibility with smart thermostats, which further enhances energy efficiency and user convenience.

Another notable characteristic of the Bryant 583A is its durability. Constructed with high-quality materials, this furnace is designed to withstand the rigors of continuous operation and to provide reliable service throughout its lifespan. Additionally, it features a heavy-duty heat exchanger that ensures optimal heat transfer while reducing the risk of breakdowns.

The Bryant 583A also prioritizes safety with features such as an automatic shut-off, which activates in the event of a malfunction, protecting both the system and the home. Additionally, its compact design allows for easy installation in a variety of spaces, making it a versatile choice for different home layouts.

In summary, the Bryant 583A is a remarkable gas furnace that combines high-efficiency performance, cutting-edge technology, and reliability. With its two-stage heating operation, variable-speed blower motor, and robust safety features, it caters to homeowners seeking both comfort and cost savings during the colder months. As a trusted name in heating solutions, Bryant continues to lead the way in delivering products that enhance home comfort while prioritizing energy efficiency and durability.
Top Page Image Contents