OpenServer, Installing Directly from CD-ROM

2.4 OpenServer

The following sections contain procedures for installing the ESP driver on an Open Server release 5.0.5a or higher system.

2.4.1 Installing Directly from CD-ROM

1.Mount the CD-ROM volume using the following command: mount -f ISO9660,filemode=444 <device> <mount_point>

For example, the following command mounts a CD-ROM on drive 1 to /mnt:

mount -f ISO9660,filemode=444 /dev/cd1 /mnt

2.Install the driver using the “custom” utility with media image

VOL.000.000.

3.When custom prompts for Media Device, select Media Images.

4.When custom prompts for Image Directory, specify:

/mnt/DRIVERS/ESP/SCO

5.Follow the instructions for custom contained in the le: /mnt/DRIVERS/ESP/SCO/README.

2.4.2Creating and Using OpenServer ESP Installation Diskettes on OpenServer

1.Be sure the mkdev cdrom command has been run.

2.Mount the CD-ROM volume using the following command: mount -f ISO9660,lower <device> <mount_point>

For example, the following command mounts a CD-ROM on drive 0 to /mnt:

mount -f ISO9660,lower /dev/cd0 /mnt

3.Run the following commands: cd /mnt [or other mount point]

./makeunix.sh

4.Follow the on-screen instructions to build an installation diskette for OpenServer ESP.

5.Once the OpenServer installation diskette is created, refer to the following le for detailed installation instructions: /drivers/esp/sco/readme.txt

11Equinox ESP Multi-Interface Serial Hub Product Installation Guide