Bontrager 231793 DT-Swiss Comp series hubs, Special information before you begin, Things to avoid

Page 18

DT-Swiss Comp series hubs

Important information before you begin with Comp series hubs

Some Bontrager front hubs utilize DT Swiss internal parts. This manual is intended for retailers with the appropriate skills and knowledge to work on these hubs. Please read the entire section before carrying out any kind of maintenance work.

This manual details the principle design features of DT Swiss front hubs and also provides instructions as to maintenance and repair work. Please take special care to use only original DT Swiss special tools in order to undertake the work details in this manual. Use only DT Swiss replacement parts.

In this manual, the hubs are shown installed in

a complete wheel. Maintenance work should be carried out on complete wheels where possible. Otherwise, some steps can not be carried out correctly.

This manual provides technical and spare parts infor- mation for these hubs. If you have further questions about these hubs regarding technical information, sup- port, or warranty, they should be directed to Bontrager Technical Support via phone or on the Bontrager web site at www.bontrager.com.

In the event of improper servicing of the hubs, Bontrager has the right to refuse any warranty.

Special information before you begin

Bearing resistance: New or newly re-built hubs have a higher rolling resistance than used hubs because the grease in the freehub has not yet been evenly distributed and the seals have not yet bedded in.

Check your work: Before use, always check the hub for proper functioning.

Regular Maintenance

Maintenance of the front hubs should be performed at least once a year. This maintenance schedule is based on normal usage. If you ride your bike more than average, or in rain, snow, or off road conditions, service your bicycle more often than the schedule suggests. If any part appears to be malfunctioning, inspect and service it immediately.

Things to avoid

Avoid high pressure washing systems, like those at most car washes. The high pressure can bypass bearing seals, letting water into the bearings. Do not use any kind of solvents or tensides- this can damage the hub.

Tool list for DT Swiss front hubs

The following tools may be necessary to perform maintenance work on DT Swiss

Comp series hubs:

Long bearing press

 

Short

 

bearing

Short bearing press

 

 

press

DT 17mm cone wrench

 

 

Comp front hub bearing press

Long

Multi-purpose DT grease

bearing

press

 

These maintenance items are

 

 

 

 

 

 

available as TCG part #211416.

 

 

 

 

Special screw-

 

 

driver

 

 

 

Front hub bear- ing press

2003 Bontrager Service Manual

19

 

Page 17 Page 19
Image 18
Page 17 Page 19
Contents HUB Instructions Part Number HUB Instructions Standard Remove the axle Clean and inspect the partsFront hubs- Loose ball Lubricate bearings and threads2002/2003 Superstock Disc, Select ATB Disc Exploded view and Parts list2000/2001/2002/2003 Superstock 2002/2003 Select ATBFront hubs- Loose ball, semi-cartridge Formula FCM While turning the end1999/2000 Race Disk Race Disk2000/2001 Race Front hubs- Cartridge bearing, alloy axle 2002/2003 Bontrager Race, Race Disc front wheelsAdjustable nut AxleFront hubs- Cartridge bearing, threaded alloy axle Needs photos and text2002/2003 Bontrager Race Lite Road front wheels Pos Description End nut Seal Bearing Hub shell Axle 2002/2003 Race Lite RoadFreehub body information non-DT Swiss Rear hubs- Loose ball Assemble the hub2002/2003 Bontrager Select ATB Splined2001/2002 Bontrager Superstock 2002/2003 Bontrager Superstock Disc, Select ATB DiscRear hubs- Loose ball, double sealed Formula FCM With your fingers orRace Disk Rear hub- Cartridge bearing 2002/2003 Bontrager Race, Race Disc rear wheels2002/2003 Race Disc Special information before you begin Regular MaintenanceDT-Swiss Comp series hubs Things to avoidComp front hub Disassemble the hubExploded view and Parts list Installing the pawl spring and pawls Install the freehub bodyComp rear hub Freehub body seal Page Determining the year of hub Pro series hubsImportant information before you begin with Pro series hubs Required tools2002/2003 Race X Lite Pro front hubRace Lite, ATB, Race Lite 29, 2003 Race X Lite ATB 2002/2003 Race X Lite Carbon, Race X Lite AeroExploded view and Parts list Pro rear hub Install the freehub Part list on followingEarlier model hub Exploded view and Parts list

231793 specifications

The Bontrager 231793 is an advanced mountain bike tire designed to enhance performance on various terrains while providing users with durability and traction. Known for its dependable construction and innovative features, the 231793 has become a popular choice among cycling enthusiasts seeking a reliable tire for their off-road adventures.

One of the key features of the Bontrager 231793 is its versatile tread pattern. The tire boasts an aggressive design that enhances grip on loose and uneven surfaces such as mud, gravel, and dirt. This tread pattern is carefully engineered to allow for quick, confident cornering while minimizing the risk of slip, making it an ideal choice for adventurous riders who tackle challenging trails.

The tire employs a robust casing that not only contributes to its durability but also enhances puncture resistance. This characteristic is essential for mountain biking enthusiasts who venture into rough terrains where sharp objects may pose a threat to tire integrity. The reinforced sidewalls provide added protection against pinch flats, ensuring a smoother, worry-free ride over rocky and harsh surfaces.

Additionally, the Bontrager 231793 is compatible with tubeless setups, which offers substantial benefits in terms of performance. The tubeless design allows for lower tire pressures, improving traction and overall ride quality while reducing the risk of pinch flats. Cyclists can also enjoy a significant reduction in weight by eliminating the need for inner tubes, resulting in a more responsive handling experience.

Another notable characteristic of the 231793 tire is its weather resistance. Designed to perform reliably in various weather conditions, this tire offers excellent traction on wet surfaces without sacrificing performance in dry conditions. This versatility makes it a suitable option for riders who frequently encounter changes in weather and terrain.

In summary, the Bontrager 231793 stands out in the crowded market of mountain bike tires due to its aggressive tread pattern, durability, and tubeless compatibility. Whether tackling steep climbs, navigating technical descents, or exploring diverse trails, this tire is engineered to provide riders with the confidence and control they need for an exhilarating biking experience. Adventure seekers looking for reliability and performance in their mountain biking adventures will find the Bontrager 231793 to be an exceptional choice.
Top Page Image Contents