Buffalo Technology LPV2-USB-TX1 user manual

The Configuration menu will appear. Enter an acceptable Print Server Name and Port. These can be left as default if desired. The Web-based Configuration system can be password protected by checking

the ‘Change Password’ checkbox and entering and verifying a new password. All of the protocol checkboxes can be left checked. Press the ‘Save’ button when configuration is complete. A message will appear recommending a reset. Press the ‘OK’ button.

Press the ‘TCP/IP’ link on the left. Enter a fixed IP address or set the bullet to ‘DHCP Client’. This will be the IP address used for PC-Based printing and for configuration. Store the IP address in a safe place in case you need to access the configuration options again. Press the ‘Save’ button when configuration is complete. A message will appear recommending a reset. Press the ‘OK’ button.

20