Buffalo Technology LPV2-USB-TX1 instruction

Press the ‘AppleTalk’ link on the left. Change the ‘Rendezvous Service Name’ to an appropriate name for the printer. Press the ‘Save’ button when conﬁguration is complete. A message will appear recommending a reset. Press the ‘OK’ button. Finally, press the ‘Reset’ button on the left side of the browser. The browser window can now be closed.

Restore the TCP/IP settings. Open your ‘System Preferences’ and select ‘Network’. Set ‘Show’ to ‘Buit-in Ethernet’. Restore the settings that were recorded previously. Use the ‘Using DHCP’ option from the pull down menu if the IP address is to be automatically assigned. Otherwise, enter the proper static IP address information. Press the ‘Apply Now’ button when conﬁguration is complete.