Optimus STAV-3670 Using the Remote Control, AUDIO∙SURROUND Switch, Receiver/Amplifier Operation

TEST TONE

Using the Remote Control

			AUDIO∙SURROUND
		SURROUND
ASMS		AUDIO
			CD
RANDOM BEST		DISC
DECK1	DECK2
	TAPE
STATION		CLASS FM MONO
REAR		TAPE2
LEVEL		MONITOR FUNCTION
LEVEL		MODE	MUTING	Receiver/
CENTER		SURR
				Amplifier
RETURN	CENTER	S.BASS		Section
TEST		DELAY
TONE	MODE	TIME
RECEIVER	POWER		MASTER
	CD	TAPE	VOLUME

AUDIO/VIDEO

SYSTEM REMOTE OSR

RECEIVER

POWER

The remote control works up to a distance of about 23 feet, and within a 30- degree angle on either side of the receiver. Point the control at the receiver’s front panel and press the desired button(s).

Many buttons on the remote control work the same as buttons on the receiver’s front panel. Use these buttons exactly as you would use the corresponding but- tons on the receiver.

AUDIO∙SURROUND Switch

Set the switch to AUDIO to control audio components such as CD players or cas- sette decks. Set the switch to SURROUND when setting the surround sound options.

When you set the switch to SURROUND, dual-function buttons control the function marked in gold next to the button. For example, the button marked

and RETURN operates the test tone function when you set the switch to SUR- ROUND and returns the system to default settings when you set the switch to

AUDIO.

Receiver/Amplifier Operation

Before operation press RECEIVER POWER to select receiver/amplifier operation.

STATION	Moves to the next higher or lower station in memory with AU-
	DIO∙SURROUND set to AUDIO.
CLASS	Selects the class of the station in memory with AUDIO∙SUR-
	ROUND set to AUDIO.
FM MONO	Selects the FM reception mode with AUDIO∙SURROUND set to
	AUDIO. See Page 17.

–REAR LEVEL + Controls the relative volume of the rear speakers. See Page 21.

TAPE 2 MONITOR	Switches the receiver to monitor the source connected to the
	TAPE 2 MONITOR jacks. See Page 15.
FUNCTION	Selects a program source (VCR/TAPE 1, PHONO, TUNER, CD,
	or LD/DVD). Repeatedly press FUNCTION until the display shows
	your desired program source. See Page 15.

–CENTER LEVEL + Controls the relative volume of the center speaker. See Page 21.

SURR MODE	Selects between Dolby Pro Logic Surround or Simulated Sur-
	round sound. See Page 20.
MUTING	Silences the receiver. Press again to restore the sound to its pre-
	vious level. See Page 17.
TEST TONE	Sounds test tones from each speaker with AUDIO∙SURROUND set
	to SURROUND. See Page 21.
RETURN	Returns the receiver to its default settings with AUDIO∙SUR-
	ROUND set to AUDIO. See Page 24.
CENTER MODE	Selects among the three center modes or 3CH Logic. See Page
	21.
DELAY TIME	Sets the rear-channel delay for Dolby Pro Logic Surround and
	Simulated Surround programs with AUDIO∙SURROUND set to
	SURROUND. See Page 21.
S. BASS	Enhances bass sound with AUDIO∙SURROUND set to AUDIO.

+MASTER VOLUME –Adjusts the system’s volume. See Page 15.

RECEIVER POWER Turns the receiver on and off. See Page 15.

Using the Remote Control

22