Asante Technologies FS4016P manual Desktop Placement

FS40016P.fm Page 3 Tuesday, March 16, 1999 5:53 PM

Asanté FriendlyNET FS4016P Installation Guide

The Asanté FriendlyNET FS4016P is designed for easy “plug and play” installation. Before you con- nect your switch to other devices, there are several issues you should keep in mind:

ΔWhen connecting the switch to a workstation using unshielded twisted pair cable, you must make sure that the cable length is not greater than 100 meters. 10Base-T twisted pair Ethernet cabling should be category 3 or better, and 100Base-TX twisted pair Fast Ethernet cabling should use tested category 5 cabling.

ΔNetwork cable segments can be connected to, or disconnected from the switch while the power is on. Plugging in or removing network cables while your switch is operating will not interrupt the operation of the switch.

ΔWhen placing your switch, you need to avoid dusty locations and electromag- netically noisy areas.

Desktop Placement

You can place the switch on a table. In this case, use the four self-adhesive feet, which are provided with the Asanté FriendlyNET FS4016P for cushioning purposes. Stick them on the four corners of the bottom surface of the switch, as shown in diagram below to cushion it against vibration.

Uplink	5	4	3	2	1
					Link/Activity
					Collision/FullDuplex
						Switch Ethernet speed-Dual port-5
					FS4005P	NETRIENDLYF

Page 3